Jump to content
SAU Community

Recommended Posts

Hey guys,

So I have purchased my dream wheels for my S2 R33 GTST recently and although it looks great and all, it isn't really fun to drive in mainly because the tyres hit against the guards when going over big speed bumps. The problem becomes worst when I have a passenger in the rear (let alone a full car load).

My wheels are 17 x 9 +22 (I'm running 255/40 tyres at the front and 245/45 at the rear). The car has been lowered on cusco coilovers and the damper settings is currently on 4 out of the max 5. I do not want to invest in a camber kit/bushes (maybe in the future when I have more funds) so I am looking for a cheaper solution. I do not want to run stretched tyres.

I initially thought my guards were rolled but have since been told otherwise. Can someone please tell me if my guards has been rolled or not by referring to the pics below?

If they have been rolled - Will flaring of the guards solve the problem and how much flaring will I need

If they are not rolled - Will rolling the guards solve the problem or do I still need to get them flared abit

Any other solutions I havn't thought of?

Thanks for your help guys!!!

2012-06-05201833.jpg2012-06-05201712.jpgte37s.jpgte37-3.jpg

Edited by newbatplay
Link to comment
https://www.sau.com.au/forums/topic/401848-trying-to-fit-my-dream-wheels-te37/
Share on other sites

Thanks Aaron

The two picture of the guards was at the front. The rears are exactly the same. I thought unrolled guards sit L shape whereas mine appear to be pressed together?

So the plastic inner guards are just the black plastic thing held by that bolt? Will water/dirt likely to cause me more problems?

I'm located in Sydney.

plasticinnerguard.jpg

Edited by newbatplay

yeh dirt kind of gets into annoying places only really gets in front of the door jam.. just hard to clean.. you can try trimming perhaps.. if you in melbourne i can re roll them or flare it if you need..

the fronts have the tabs still straight. they arent rolled.

wow thanks for your kind offer! =)

When you say the tabs are still straight, do you mean like an 'L' shape? Because mine are more like a V if you get what I mean.....

Edited by newbatplay

why do you have 255 on the front and 245 on the rear???

245 on front and 255 on rear will have less clearance issues surely?

are they 17x9 +22 all front and rear, cause it looks like a good offset and size to have on a gtst..

I know 17x9 +38 dont fit on the front comfortably with 255 tyres

I initally had 255 at the rear and 245 at the front but the front tyres would hit the guards going over smallish bumps so I switched them around. Most probably due to the height (245/45 has a wall height of 110mm compared to 255/40 with a wall height of 102mm).

They are 17x9+22 all around and IMO they are the perfect specs for a R33 GTST if you can get them to fit.

I bought the wheels with the tyres. 235/40/17 or a slightly stretched 225/45/17 wouldve been perfect

why do you have 255 on the front and 245 on the rear???

245 on front and 255 on rear will have less clearance issues surely?

are they 17x9 +22 all front and rear, cause it looks like a good offset and size to have on a gtst..

I know 17x9 +38 dont fit on the front comfortably with 255 tyres

17x9+38 compared to 17x9+22 would retract the wheel from the outer edge by 16mm. When you say they don't fit, is it because it will hit the inner strut?

It looks like my guards have been rolled but wasn't rolled properly. This thread <http://www.ozmpsclub...-all-equal.html> indicates that there are 2 types of guard rolls. Flatten the lip entirely vs. conventional roll.

It may be the case that I need a complete wheel arch (flattening the lip) roll to stop the scrapping as described in the link.

Edited by newbatplay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...