Jump to content
SAU Community

Recommended Posts

Got a 1996 R33 GTST Automatic which im wrecking. Car had 147,000km showing on the odometer. All parts are in good working condition unless otherwise stated.

RB25DET Complete engine including all ancillaries. Was running fine before the car was involved in an accident. Only modifications were a 3" turbo back exhaust and pod filter. Was running through an automatic transmission. $1350

http://i160.photobucket.com/albums/t177/Shano3000/P1020474.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020475.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020476.jpg

Automatic transmission with torque converter and flex plate. Perfect working condition. - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020473.jpg

Engine wiring loom and computer - $220

http://i160.photobucket.com/albums/t177/Shano3000/P1020456.jpg

Rear subframe with diif / axels / Hubs / Hicas / Suspension - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1020485.jpg

Boot lid with series 2 spoiler - $120

http://i160.photobucket.com/albums/t177/Shano3000/P1020465.jpg

Standard wheels. 2 tyres are in as new condition, 2 tyres are it the wear indicators - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1020467.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020466.jpg

3" Catback exhaust. Has small hole where pipe meets muffle at the end, easily repaired - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020483.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020484.jpg

Factory plastic side skirts. Have some scratches on the underneath of the passenger side and a crack at the end of the drivers side - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020468.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020470.jpg

Left and right rear tail lights - $30 each

http://i160.photobucket.com/albums/t177/Shano3000/P1020461.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020460.jpg

Rear bar. Paint has peeled off on corner of passenger side - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020452.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020453.jpg

Drivers side headlight. Plastic lens has a little fatigue but works perfect. - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020451.jpg

Series 2 interior dash surround - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020444.jpg

Series 2 steering wheel. Airbag center removed. - $60

http://i160.photobucket.com/albums/t177/Shano3000/P1020440.jpg

Factory side mount intercooler and piping. Everything included. - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020438.jpg

Front and rear stock suspension struts - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020436.jpg

Power steering rack - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020434.jpg

BM44 Brake master cylinder with booster - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020432.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020433.jpg

Drivers side power window switches and surround - $120

http://i160.photobucket.com/albums/t177/Shano3000/P1020430.jpg

Climate control unit - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020428.jpg

Passenger seat - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020426.jpg

Rear seats - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020425.jpg

Drivers door. Has small area where paint has bubbled. Doesn't include lock or door card - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020421.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020423.jpg

Passenger door. Doesn't include lock, door card or mirror - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020419.jpg

Series 2 interior door cards and back sides - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020417.jpg

Drivers side front fender - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020416.jpg

Passengers side front fender - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020413.jpg

Front brakes. Good working condition, pads and disks are about 50% worn. - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1020407.jpg

Rear brakes. Good working condition, pads are low and disks may need machining before use - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020406.jpg

Complete lock set. Ignition, doors and boot locks with original skyline key - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020403.jpg

Passenger window switch - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1020010.jpg

Space saver spare wheel - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020006.jpg

Front hubs. 5 stud. $60

http://i160.photobucket.com/albums/t177/Shano3000/P1010949.jpg

Castor rods with urethane bushes - $30 each

http://i160.photobucket.com/albums/t177/Shano3000/P1010934.jpg

Radiator. Aftermarket of somesort. In as new condition. - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1010937.jpg

Aircon condensor. As new condition.- $50

http://i160.photobucket.com/albums/t177/Shano3000/P1010935.jpg

Airbag dashpad. - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1010930.jpg

Automatic selector - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020458.jpg

Pioneer headunit and 4 channel amp - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020454.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020471.jpg

Factory jack to fit in boot. - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020462.jpg

Lower control arms / LCA's. - $80 each

http://i160.photobucket.com/albums/t177/Shano3000/P1020482.jpg

Parts available for pick-up in Emerald anytime or at Chadstone during weekdays. Will post suitable items at buyers expense. Contact me here in this thread or PM if interested in any part or want more information.

hey mate, bit confused, your car was auto but the rad is for a manual? how did the gear box lines connect to it? i thought it was my lucky day then! anyway let me know and i might be interested! cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...