Ruxis Posted November 13, 2012 Share Posted November 13, 2012 Did you read every post from 26/10?! Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6622809 Share on other sites More sharing options...
T4NK Posted November 13, 2012 Share Posted November 13, 2012 (edited) I could be wrong, but I'm pretty sure it's the other way round mate. Who's telling you this? The seller? -9s are An updated version of the -7s, pretty much the same response as the -7s but flow a fair amount more. -9s on the same set up make more than the -7s etc... i spoke with DVS Jez, and a few other ppl they will make the same power diff is, the -7s have more top end and the -9s have a bit more down low, but in the end they will both do the same job. also ill be getting a platnum pro plugin for her. Edited November 13, 2012 by T4NK Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6622947 Share on other sites More sharing options...
GTR-34A Posted November 13, 2012 Author Share Posted November 13, 2012 i spoke with DVS Jez, and a few other ppl they will make the same power diff is, the -7s have more top end and the -9s have a bit more down low, but in the end they will both do the same job. also ill be getting a platnum pro plugin for her. yea fair enough, i really thought it was the other way round though. -9s being slightly bigger but better in design, therefore only a tiny bit more lag than the -7s but more top end.. i was fairly certain the -7s were the smallest upgrade turbos you could buy, but there is so much confusion around these turbos that i wouldnt be suprised if i had it wrong haha.. Wedge you know abit about this dont you? Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6622994 Share on other sites More sharing options...
T4NK Posted November 13, 2012 Share Posted November 13, 2012 The only difference between them that i can find was the exhaust wheel 1 was like 3mm bigger then the other or somehting like that. But i cant wait 3 weeks for -9s anyway so -7s will have to do im over all teh waiting and f**king around, just want it to run so i can enjoy the car. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623009 Share on other sites More sharing options...
GTR-34A Posted November 13, 2012 Author Share Posted November 13, 2012 yea fair enough mate. just be easy on the clutch when you get it back, its generally the weakest part of the car from stock. and it is advisted when going with bigger turbos to upgrade it etc.. you doing anything else bar turbos and computer? Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623019 Share on other sites More sharing options...
wedge_r34gtr Posted November 13, 2012 Share Posted November 13, 2012 (edited) yea fair enough, i really thought it was the other way round though. -9s being slightly bigger but better in design, therefore only a tiny bit more lag than the -7s but more top end.. i was fairly certain the -7s were the smallest upgrade turbos you could buy, but there is so much confusion around these turbos that i wouldnt be suprised if i had it wrong haha.. Wedge you know abit about this dont you? I'm not 100% sure but i believe the exhaust housing is slightly different design on the -9 too. -7's = r34 n1 turbos -9's ARE HKS GTSS turbos The graphs i looked at when researching turbos showed <150rpm difference between the two (-9's been slightly worse), but the -9's usually had the better top end (10-15kw's), however this is highly dependent on supporting mods and i couldn't find any back to back comparisons (who's going to waste 2.5k to go from 7's to 9's unless the've blown a turbo) TBH throw 20-24psi through either of them and your going to be making ~330awkw and absolutly exstatic. You can't really be disappointed with that. Edited November 13, 2012 by wedge_r34gtr Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623055 Share on other sites More sharing options...
wedge_r34gtr Posted November 13, 2012 Share Posted November 13, 2012 i spoke with DVS Jez, and a few other ppl they will make the same power diff is, the -7s have more top end and the -9s have a bit more down low, but in the end they will both do the same job. also ill be getting a platnum pro plugin for her. Good stuff - that means all three of us a runing platniums. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623057 Share on other sites More sharing options...
34GeeTeeTee Posted November 13, 2012 Share Posted November 13, 2012 Spotted Genelle on the freeway earlier Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623074 Share on other sites More sharing options...
GTR-34A Posted November 13, 2012 Author Share Posted November 13, 2012 all this talk of turbos is making me very keen for the next stage on mine.. seriously going to have to consider E85 i think.. have seen results with a similar planned setup as mine making 370awkw! will be hard to pass that potential up i think.. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623115 Share on other sites More sharing options...
wedge_r34gtr Posted November 13, 2012 Share Posted November 13, 2012 all this talk of turbos is making me very keen for the next stage on mine.. seriously going to have to consider E85 i think.. have seen results with a similar planned setup as mine making 370awkw! will be hard to pass that potential up i think.. Yep - I've been saying for a while i rekon it would be possible to crack 400awkw with E85 with 9's. Someones 34nur in melburne made 379awkw with 7's (stock n1's) and E85 recently. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623135 Share on other sites More sharing options...
GTR-34A Posted November 13, 2012 Author Share Posted November 13, 2012 Yea I reckon 400 would be too much for those turbos... Could probably get a dyno to read it, but how accurate?... I'm pretty sure both run out of puff around 22-24psi?...which would restrict huge top end power etc... Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623147 Share on other sites More sharing options...
Tai1or Made Posted November 13, 2012 Share Posted November 13, 2012 Anthony. Your sig is huge. Carry on. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623151 Share on other sites More sharing options...
GTR-34A Posted November 13, 2012 Author Share Posted November 13, 2012 Haha yea I know, when I changed it I went through about 5 iterations of making it smaller then got the shits with it and left it... Will fix it... Sometime ha Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623187 Share on other sites More sharing options...
Tai1or Made Posted November 13, 2012 Share Posted November 13, 2012 Not complaining. Nothing wrong with Simpson coloured Skylines. Just stating a fact. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623191 Share on other sites More sharing options...
T4NK Posted November 13, 2012 Share Posted November 13, 2012 (edited) yea fair enough mate. just be easy on the clutch when you get it back, its generally the weakest part of the car from stock. and it is advisted when going with bigger turbos to upgrade it etc.. you doing anything else bar turbos and computer? Yep, going to do mid pipe on my exhaust since the cat back is 3 and a half inch and so are the dumps but has the stock mid pipe, also needs a new clutch as mine is almost shagged, will do injectors and maybe fuel pump with the ECU, then after i have it all sorted in a year or so i may put a big single on it when i get another car as a daily, and go for massive power since the engine is built for it. ohh and i hope everyone has taken the restrictor out of the side of the stock air box to, it just pops out 2 clips just use a flat head screwdriver, will double the air into the box, i can now hear my car sucking in that sweet sweet air as i thunder down the roads lol. Edited November 13, 2012 by T4NK Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6623629 Share on other sites More sharing options...
Humbla Posted November 14, 2012 Share Posted November 14, 2012 Spotted Genelle on the freeway earlier Hey matt,where you in your work van?And did you toot,truck passed me after and gave a toot as well. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6624435 Share on other sites More sharing options...
m.j.h Posted November 14, 2012 Share Posted November 14, 2012 Wasn't me in the truck unfortunately You around this way still. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6624551 Share on other sites More sharing options...
Humbla Posted November 14, 2012 Share Posted November 14, 2012 Yeah martin,up here till thursday week. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6624714 Share on other sites More sharing options...
Ruxis Posted November 14, 2012 Share Posted November 14, 2012 urgh cbf packing for the weekend and emma is busy studying to pack for me.... what do i need? >.<!!! (mainly directed at genelle hahaha) Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6624717 Share on other sites More sharing options...
Humbla Posted November 14, 2012 Share Posted November 14, 2012 Harness for doggy,bed an blanky an poo poo bags all done. Link to comment https://www.sau.com.au/forums/topic/402383-s-a-u__n-e-w-c-a-s-t-l-e/page/167/#findComment-6624733 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now