Jump to content
SAU Community

Recommended Posts

Same man and it looks really clean too!

Well... steering wheel doesn't have bite marks out of them like most and plenum doesn't looking like someone poured battery acid on it like most haha

Check underneath and look at the chassis rails, check for rust etc...

Also, have the car out in consistent light to make sure the body reflection is nice and straight all along (it shouldnt have wavelengths in the paintwork)...Also bring a magnet and put it in a sock and run it over any areas of concern as this will pick up bodyfiller etc as magnetic attraction will be weaker.

And check for all original seam welds...(will be matte in appearance). Unoriginal seam sealer will be more shiny and have white streaks through it.

Good advice benji.

Well, on my way back to Perth. Holiday was too short :-(

Picked up my front pipes and covers from Paul today. They still need a bit if work, but just waiting on a new cat and the engine will be basically done and ready for some boost and rpm.

Also saw the first commercially sold Nitto 2.8 crank and pistons at paul's...they looked pretty smick.

Man that thing was clean!!! The interior was as good as ants.

The engine bay had no peeling on the plenum and every hose felt squishy and brand new.

Was in heaps better nick then my car!

Pretty sure he'd take 16 for it too.

There was one thing though. The under side of the boot was darker then the outside paint colour. It wasn't black but a darker blue?

Not sure, Defs worth a relook at when I'm ready with ant dawg

Man that thing was clean!!! The interior was as good as ants.

The engine bay had no peeling on the plenum and every hose felt squishy and brand new.

Was in heaps better nick then my car!

Pretty sure he'd take 16 for it too.

There was one thing though. The under side of the boot was darker then the outside paint colour. It wasn't black but a darker blue?

Not sure, Defs worth a relook at when I'm ready with ant dawg

In panelbeating, it is very difficult to make a repair that is so good that there is not even the slightest bit of water leakage.

Did you notice if there was any moisture in the taillights? If there was, its likely a repair has been done.

The interior side of the bootlid having a darker shade of blue sounds odd. Was it matte colour?

nah did see any moisture man, the headlights were sweet but didnt check rear.

misus only gave me 30 mins to go over it as she needed to go to work so didnt even get a drive :(:(:(!!!

yeah it could of just been like a matte. was just in a carpark so hard to see. it looked so good i doubt that itd be a problem. considering bonnet and boot had it.

i hope its still available by the time im ready to buy!! pretty keen!!!

Man that thing was clean!!! The interior was as good as ants.

The engine bay had no peeling on the plenum and every hose felt squishy and brand new.

Was in heaps better nick then my car!

Pretty sure he'd take 16 for it too.

There was one thing though. The under side of the boot was darker then the outside paint colour. It wasn't black but a darker blue?

Not sure, Defs worth a relook at when I'm ready with ant dawg

paint fade dude.

i totally would be interested if i was looking..

Paint fade on the inside?? Is that normal??

wait..

you said it was darker on the inside right?

so the paint has faded on the outside making the paint on the inside look darker.

remember it's a 17 year old car.

yeah i thought itd be a mixture of both of those, thanks guys.

even more keen now :)

hope it doesnt sell!!!! he has shit photos of it, its stock and he isnt a good seller until you meet him so hopefully itll wait for me!

jarrad just spend the money on mods for ur car u will end up with something much better and a shitload more reliable than anything ur looking at and u will know the history of it 100%

hey everyone. just got back from holidays and im cleaning my series 1 r33 up a bit but all the work is boring me and thought it might be a good opportunity to meet some of the local skyline owners and get some ideas for mine. just tossing the idea up of a new years meet and maybe a cruise?

hey daniel,

we got a cruise coming up on the 4th of jan, the friday.

event hasnt been made yet i dont think but yeah were going up to wooten way and then maybe have drinks afterwards somewhere closer to home i beleive.

nice one mate, uhh its north of raymond terrace.

its a nice deserted windy road and best of all its 100kms the whole way.

just keep the day free and be sure to pop in and ask up closer to the day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...