Jump to content
SAU Community

Recommended Posts

CP forged 86.5mm 1000HP manly rods and a tomei head gasket.

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

Its tuned on an incoming tide :laugh:

LMFAO FOR AN EXTRA 50 AT THE RUDDER KW

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

yeh oil system has been done, sump and cam baffles, oil restrictor, OEM GTR oil pump with upgraded pump gears to make sure they dont crack.

Im not 100% on the block i know they have had to bore it out to fit the pistons and then everything else that goes with doing that, ill have to speak to the guys at the shop to find out everything they did to it.

as far as the head goes i have NFI atm keep in mind im not a mechanic by anymeans and im just learning how all this stuff works now, i have been told the head had more damage then 1st thought and has had to have some more work done at the machine shop then they thought it would.

BTW found u a box

http://www.skylinesa...s-of-256-parts/

and i got some more info on the Varestone rims also

http://www.varrstoen.com.au/shop/2-2-1-wheels/2-2-1-rims-wheels-18i

they clear brembos with ease no issues, one of my m8s in SA said the local boys run them on there drift missles.

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Im so torn on what rims to get one day i want GT-C the next i want TE-37 the next i want some random set of work rims, FML

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

in the Volk GT-C gold center chrome dish, there is a few sets going around but they are all stagerd fitments

in the TE-37 White or bronze

in the random Works white or bronze again.

If only these where +12

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1296

Edited by T4NK

i think the rim you have currently on the car look pretty smick.

Yeh i dont mind them but they are a POS to clean, they have heaps of tight spots in them and i know 1 of the rear rims is buckled, i may look into the cost to have them fixed and get some center caps

BTW they appear to be GTR Nur spec Enkei NT03-M rims, i have never seen another set of them in my life, they have GTR NUR stamped around the center hub and are identical to these

http://www.enkei.com/nt03m.shtml

http://www.ebay.com/itm/LIMITED-EDITION-ENKEI-NT03-M-18x9-5-27-5X114-3-PURE-WHITE-EVO8-9-X-FD3S-SUPRA-/261068728160?pt=Motors_Car_Truck_Parts_Accessories&hash=item3cc8e8a760&vxp=mtrIm

considering a set of these in white, for 2k i can get a full set, with caps and lock nuts posted to me using DHL

http://www.perfectru...result_mode=qui

Edited by T4NK

oh em gee!! thats so kewl.

wonder how much aca will pay me for the vid if i say its a 40 zone?!

I will tell them i was doing 40 and you were dangerous driving at 10 and going to cause an accident :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
    • +1 for Jesse Streeter. Over the years I have got a bunch of stuff from him (usually wheels, but other parts like aftermarket braces and coolers). He was very good with shipping things to Australia. He may be able to send to other countries.
×
×
  • Create New...