Jump to content
SAU Community

Recommended Posts

definatly see JEZ - met him the other day, top bloke :-)

what was the date of this fang up the old pacific?

21st.... Just doing the details for it now....

No fang, just sensible driving :ph34r:

righto, won't be around :-(

i'm only in newe/foster for 1 more week (6-14th october) - so hopefully there will be 1 improtue cruise then.

Sound like you guys had a blurry night and Jarad needs to explain to his neighbour why theres a loaf of bread on his roof lol.

My family thing was about the same..pretty messy. One of my drunker cousins spent the night in an open drain/sewer lol

Edited by wedge_r34gtr

Where you going? I am sure someone will throw on a quick cruise.... I know i would if my car is done (Should be)

I told Jarrad to hammer throw the toaster next so they could at least make brekky with it :laugh:

DUDE! Open sewer? lol

righto, won't be around :-(

i'm only in newe/foster for 1 more week (6-14th october) - so hopefully there will be 1 improtue cruise then.

Sound like you guys had a blurry night and Jarad needs to explain to his neighbour why theres a loaf of bread on his roof lol.

My family thing was about the same..pretty messy. One of my drunker cousins spent the night in an open drain/sewer lol

LOL Notsureifsrs.

Dude, you should have fetched him out of there for his own safety.... there'd be HIV positive syringes floating around open sewers (srs).

LOL Notsureifsrs.

Dude, you should have fetched him out of there for his own safety.... there'd be HIV positive syringes floating around open sewers (srs).

Or could get Pinkeye eh? :P

Have you checked the WT thread? I made some pictures for ya.....

g4NgU.jpg

lolololol mannnn chookie had to remind me about that the next day. i look like i knocked myself out!!

joel msg me when you wanna go for a drive buddy.

You are one crazy kid! I give you that much......... :P

Guys, need another day or two before posting up the cruise thread as i gotta do a bit of scouting for the Route..... Maybe a ferry crossing involved (unless you own an R33 in which case you can drive across yourself) but i need to check if the roads are worth driving or not, will also need to work out timing and destinations for a feed. We have a start though so it wont take long, at worst ill do it Thursday as ill be at work late waiting for the Nats entries to open :P

Y4DpB.jpg

IF we go that way.......

The Berowra ferry crosses Berowra Creek at Berowra Waters from Bay Road (Tourist Drive 11) to Berowra Waters Road. Information regarding the Berowra ferry service is displayed on variable message signs at Berowra Waters Rd, Berowra Heights and Bay Rd, Berrilee. Please note that trucks longer than 7 meters will not be able to approach the ferry due to road restrictions.

Operating Time:

24 hours, 7 days a week

Service Day:

Ferry services will not operate on the second Tuesday of each month between 12 noon and 2.30pm

Trip Duration:

3 mins (Please allow up to 10 mins waiting time)

If you are lowerd do not go near berowa i used to live on the river there boat access only and the ramps on and off are at sharp angles you will scrape. have scraped a standard falcon at low tide. and FFS another cruse b4 my car is ready :domokun:

ohh and not to mention, coming down the hill on the berowra side the road is a pig very narrow spots where only 1 car can get through at a time, other side tho well lets just say hill climb.

Edited by T4NK

If you are lowerd do not go near berowa i used to live on the river there boat access only and the ramps on and off are at sharp angles you will scrape. have scraped a standard falcon at low tide. and FFS another cruse b4 my car is ready :domokun:

ohh and not to mention, coming down the hill on the berowra side the road is a pig very narrow spots where only 1 car can get through at a time, other side tho well lets just say hill climb.

Good info, so IF we took that way are the roads WORTH driving? I like the sounds of "Hill climb"

Its just that if we do Galston Gorge i would rather not turn back and do the same road twice, rather do a differnent route back to Pacific Hwy.

Also, the ferry MAY make for some different photos?

I dont think any of us are excessively low? Martin (2 min noodle) is bringing supplies to fix it if its an issue :P

adam you can jump in with me!

if my gf is with me any of the boys will take ya if you dont wanna fight over the front seat hah :D. specially since its down the coast.

I would NOT be fighting her :P

adam you can jump in with me!

if my gf is with me any of the boys will take ya if you dont wanna fight over the front seat hah :D. specially since its down the coast.

I may take u up on that offer, altho i wont fit in the back seat of a skyline, my legs touch the dash in the passenger seat of my GTR with the seat all the way back, and my legs hug the steering wheel when im driving :P

you would be doing down the Galston side then if u where to come from wisemans, so it would be a bit of a downhill that part should be fun, the way up on the berowra side you would want to take slow but then the old pac going home...well everyone knows about the old pac thursday night runs :wub:

and if u have a fix for the ferry then no issues otherwise you would have to go out to hornsby and back up from there.But i know my GTR at 120mm off the pavement would scrape like a bitch on that ferry. Check the tide chart to make sure its not going to be low tide if it is stay clear.

Edited by T4NK

Depends if we want to stop along the old pac at the cafe for breakfast or use the truckies lounge at the twins

Depends what time it will be too! And dont tell Chookie we are going down Old Pac as he will want to stop and buy 18 pies! :woot:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...