Jump to content
SAU Community

Recommended Posts

Check all the usual things Quality of radiator fluid, are you losing any? Thermostat fully opening? system retaining right pressure? waterpump not too wornout? condition of radiator interior ,hoses and water passeges? oil cooler? theres a start

Link to comment
https://www.sau.com.au/forums/topic/40243-overheating/#findComment-825714
Share on other sites

Yep, GTRs run hot when giving them a bit of a hammering. I have been warned by many people now not to even think about taking the GTR to Q.R. until I have a nice oil cooler, a decent sump baffle setup, bigger oil pump, and bigger radiator. This has been told to me by Ernie (Skyline imports), Gavin Woods, Bruce (LEDA suspension) to name a few, and Sydneykid has also mentioned this. So unitil these things are completed on me car, my Sprint Events at Q.R. are over, not taking the risk.

I can get the oil temp in mine to the "near danger zone" with a quick drive through the mountains, hate to think what it could get to on the track.

Link to comment
https://www.sau.com.au/forums/topic/40243-overheating/#findComment-826263
Share on other sites

rb26dett, you think the TRUST cooler may not be up to the task ? What experience have you had and what do you recommend ?

Squizz, I have the same problem up around Nebo, temp climbs real quick. We should organise a drive.

the oil cooler is in my car. it holds temps to just above the 70 mark on the gauge while cruising...

but when i really get into the driving, temps still creep up, albeit slower...this is all experienced on mountain runs. if u don't pay too much attention to the oil temp gauge u'll find it sitting at half in no time at all...

plus i'm running about 10 litres of engine oil with a trust sump...still the temps go up....

and the runs are done at night...hate day runs too much traffic, plus it's cooler at night...also done with heater venting into cabin...n still...problems with oil temp

Link to comment
https://www.sau.com.au/forums/topic/40243-overheating/#findComment-835776
Share on other sites

What's the ambient temp in the engine bay like when the oil starts to run hot. if you can get the engine environment temp down it may help. Didn't 'Godzilla' have coolers on just about everything

Just driving normally it's bloody hot under the bonnet. Some venting may be in order...

Link to comment
https://www.sau.com.au/forums/topic/40243-overheating/#findComment-835818
Share on other sites

What's the ambient temp in the engine bay like when the oil starts to run hot. if you can get the engine environment temp down it may help.   Didn't 'Godzilla' have coolers on just about everything

aust spec 32 gtr has oil cooler for transfer case, that about the major difference to jdm 32 gtr. So engine/transmission/diff oil coolers are still needed (in order of preference).

I'm not sure how much the sump got heats up by the front diff and vice versa, as you can now get aftermarket front diff cover for extra oil capacity with more cooling fins.

Link to comment
https://www.sau.com.au/forums/topic/40243-overheating/#findComment-835910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Alrighty, I'll have to grab a couple pics and type out something soon in another post. I haven't driven a modern X no, this would be the first one really. Yeah the rental boxes are always cheap as chips right? So I'd doubt that anyone was handing out GTs to go and abuse. But I s'pose I could be wrong for sure. New cars these days though? Pretty unimpressed with what I see now; 20 years and all that, like you said. It just kind of worked out to have these two cars now. I'm pretty pleased with that, don't need much else. I'm sure you lads are right about the temps and for sure, you wouldn't have much time to drive 'em down there if you all were like me. I do hate sweating all over the seats though😆
    • Let large companies that are making money off selling kits do the preliminary engineering for you. If they all do -10, then that is all you'll ever need. 
    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
×
×
  • Create New...