Jump to content
SAU Community

Recommended Posts

Looking good, I am going to watch with most interest.

That turbo I bought off of you a few years ago is still going well :), absolutely love it.

yeah i am a bit excited about the build, i would have done a much bigger engine set up but this came at the wrong time as am getting married later this year so yeah dont want to spend that much money but just something that would be reasonably safe for 400kw mark,

am glad turbo is still going good, they are absolutelly amazing turbos and the new gtx are even better,

morie from HP in a box has told me u had a bit of a tough time too with the engine but glad everythings alrite now

yeah spool has either 9:1 or 8.2 with r33 head but it does change with 34 head as it has a smaller combustion chamber

ah that's right you have a R34 head I have a R33 one that makes sence now

yeah i am a bit excited about the build, i would have done a much bigger engine set up but this came at the wrong time as am getting married later this year so yeah dont want to spend that much money but just something that would be reasonably safe for 400kw mark,

am glad turbo is still going good, they are absolutelly amazing turbos and the new gtx are even better,

morie from HP in a box has told me u had a bit of a tough time too with the engine but glad everythings alrite now

Ah, Congratulations on getting married. Yeah, I had my own engine trouble a few years ago, full story in my Build Thread - link in Signature :)

Ah, Congratulations on getting married. Yeah, I had my own engine trouble a few years ago, full story in my Build Thread - link in Signature :)

thanks buddy, that is a great write up and great build u did there :) if you dont mind me asking how much did it cost for the block work, balance, machining etc??

thanks buddy, that is a great write up and great build u did there :) if you dont mind me asking how much did it cost for the block work, balance, machining etc??

For the Block, Crank, Rod and Piston machine work was roughly $3k

$3K OH OK i didnt think it costs that much but i guess they did everything so it may all add up bit by bit

me either mate my missus won't find out how much my RB25/30 is goin to cost

me either mate my missus won't find out how much my RB25/30 is goin to cost

lol yeah i have the same problem i cant browse anything in front of her so she doesnt see the prices lol, she got preety freaked out when i sold the sway bar for $80, she was like who would pay that much money for that, lol

HO HO HO MERRY CHRISTMAS, well it felt like christmas today i got my engine rebuild kit pistons, rods, bearings, headgasket thanks to

Brad from spool imports he has been a great help and sent them over fast :)

If i am lucky 2mrrow ill go and drop my head, block, crank, rods, pistons for a 20thou bore and hone, clean, balance, facing off the block and head for a perfect gasket fitment etc etc.

here are some photos

post-46081-0-08801500-1340617460_thumb.jpg post-46081-0-47343200-1340617497_thumb.jpg post-46081-0-43781900-1340617507_thumb.jpg

post-46081-0-83874400-1340617515_thumb.jpg post-46081-0-56055200-1340617525_thumb.jpg post-46081-0-37199200-1340617535_thumb.jpg

post-46081-0-49050800-1340617543_thumb.jpg post-46081-0-78275000-1340617649_thumb.jpg post-46081-0-75804200-1340617657_thumb.jpg

well yesterday i dropped my head, block, pistons, rods, crank, clutch+flywheel, harmonic balancer all to be cleaned and balanced at

ADVANCED ENGINE RECONDITIONERS in salsbury

- block is going to receive a deep clean paint, dirt etc etc

- will also deck the block 2 or 3 thou

- Bore and hone 20thou

- Balance everything

- crank is going to be machined and a crank collar is going to be fitted

- Head is going to be cleaned and faced

should be all done by the end of next week :)

I also bought a new rb30 water pump, sump gasket, manifold gasket and few other things.

So while all that is being done i sandblasted my turbo compressor housings and my engine mounts.

i also cleaned out and painted alternator, starter motor. and exhaust manifoild in heat proof paint :)

post-46081-0-00497300-1340789006_thumb.jpg the paint is fresh thats y it may look a bit funny

post-46081-0-45166400-1340789018_thumb.jpg

post-46081-0-32435900-1340789031_thumb.jpg compressor housing sandblasted :D looks better than black :)

post-46081-0-01337900-1340789046_thumb.jpg

post-46081-0-55001200-1340789058_thumb.jpg all assembled ready for 25psi of boost :)

now we just play a waiting game for the block and all :/

  • 2 weeks later...

hey guys just a bit of an update, i got my block and other bits back from the machine shop today here are some photos

post-46081-0-95538300-1341914981_thumb.jpg crank collar fitted :)

post-46081-0-31873300-1341915013_thumb.jpg balanced and polished

post-46081-0-99235300-1341915049_thumb.jpg head was faced for perfect gasket seal

post-46081-0-35312500-1341915234_thumb.jpg

post-46081-0-17041900-1341915119_thumb.jpg block bored, honed and decked

post-46081-0-70783200-1341915170_thumb.jpgpost-46081-0-96860300-1341915245_thumb.jpgpost-46081-0-88958600-1341915254_thumb.jpgpost-46081-0-89483800-1341915260_thumb.jpgpost-46081-0-23524300-1341915271_thumb.jpg

post-46081-0-85206100-1341915319_thumb.jpg pistons just test fitted :) looks good so far

post-46081-0-04642300-1341915333_thumb.jpg cbf to mask everything properly so i just used 10c and 20c pieces to mask off the wels plugs lol

post-46081-0-95779700-1341915344_thumb.jpgpost-46081-0-02147300-1341915356_thumb.jpg

post-46081-0-49795400-1341915283_thumb.jpg

i know i havent been realy updating so often but the engine will be put together sometime either this week or next week, was waiting for the oil pump to come then wrong pump sent arghhhhhhhhhhhhhhhhhhhh so frustrated at the moment cos i just get empty promisses of people that will suply me with parts f*#$ really shits me, at the end ill just end up going with a standard rb26 pump and upgraded gears cos i cant be stuffed waiting no more, i really need to get the car on the road.

  • 2 weeks later...

Hi guys well my engine is done unfortunatelly my builder didnt take any photos :( :( :( a bit dissapointed but oh well am happy the engine is up and running and now i just have to drive it to wear it in a bit before the tune :)

here is a few photos i took

post-46081-0-26376900-1343605294_thumb.jpg piston rings getting gaped

post-46081-0-43642000-1343605313_thumb.jpg crank is in ( this is as far as i have it when it was getting build :( )

post-46081-0-47937900-1343605405_thumb.jpg post-46081-0-86718100-1343605413_thumb.jpg post-46081-0-72901400-1343605424_thumb.jpg

post-46081-0-43144200-1343605436_thumb.jpg post-46081-0-94265300-1343605445_thumb.jpg post-46081-0-44667900-1343605456_thumb.jpg

post-46081-0-25057900-1343605467_thumb.jpglooking good

post-46081-0-03547800-1343605477_thumb.jpg just test fitting see what it looks like :)

post-46081-0-47501500-1343605481_thumb.jpg nearly there :)

post-46081-0-50630800-1343605479_thumb.jpg all done

running in process as we speak :)

Here is a couple of vids of a first start up :)

need to fix the idle its idling too high :(

http://www.youtube.com/watch?v=drETUueuCEI&feature=youtu.be

http://www.youtube.com/watch?v=nD0sMNBzm1o&feature=channel&list=UL

the video quality is a bit crappy especially in the second vid

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...