Airbag Light Reset

[MonsterGTR]

I have removed seat belts from my R35 and installed racing harnesses and now have an airbag light flashing at me. I have now install the resistors that are needed to trick ecu into thinking there are still airbag sensors but I need to reset light. Does anyone know how to do this???

[LSX-438]

I did this only this morning

1. Turn ignition switch from OFF to ON.

2. Air Bag warning lamp is on for 7 seconds and turns off, then turn ignition switch OFF within 1 second after the lamp turn off.

3. After ignition switch is turned OFF, wait for more than 3 seconds.

4. Repeat steps 1 to 3 two more times. (Perform 3 times in total.)

5. Turn Ignition switch ON.

6. The SRS lamp has been reset.

[MonsterGTR]

Thanks I will give it a go tonight.

[MonsterGTR]

Thanks Duncan,

Had to do it twice. First time only slowed flashing time of the light down and then the second time I did it, it cleared all together.

[LSX-438]

yeah if you don't get the timing just right it doesn't work. Sounds like it was in diagnostic mode the first time you tried (slow flashing).