Jump to content
SAU Community

Dry Sump Setups

Risking

By Risking,
in Group Buys

 Share

Recommended Posts

Risking Grand Master

Risking

Posted
Posted

Doing this as an introduction for the complete dry sump setups I'm now selling.

This will stay open for 1month (till the 1st august) as an eoi.

http://www.skylinesaustralia.com/forums/topic/403797-rb-dry-sump-setup-complete-start-to-finish/page__pid__6424652#entry6424652

This is the kit and a regular price for it.

If I can do 3-5 the price will reduce to approx $6600. If it's 5 or more the price can reduce further to possibly $6000.

I'm working with a supply deal so the more that's

ordered the larger the discount I can negotiate.

Unfortunately the fittings and hose is almost being supplied at my cost price in that thread which is massively discounted from retail. If I can place a 15k order I may be able to secure another 5% discount.

Like I said open till the 1st and deposits will be required.

(I'll be outlaying a hefty amount of cash if this goes ahead so 50% deposits will be required & the remaining before shipping)

Everything is able to be assembled within 7days pending pump and tank availability. Worst case senario 14working days to air freight pumps here

Link to comment
https://www.sau.com.au/forums/topic/403803-dry-sump-setups/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...