Jump to content
SAU Community

Recommended Posts

Has anyone find out who can get our Bose-Clarion PN-2414e unit with this error fixed in Australia or overseas and for how much? Or better yet, has anyone fixed it themselves?

There are a few reasons for this error to appear -

Circuit board problem

Cracked plastic gear

Jammed mechanism

The reasons for my CD ERR FO is the mechanism jamming which occured when I was switching tracks. I took the CD-Changer apart with the help of my father-electrician, but it proved too complex for him to figure out which part is stuck. The mechanism looks intact and not tampered with before - the car had just 40k on clock when bought.

The solutions I am considering -

Buying new unit from the US ($300), but it is missing one of the output at the back - probably for Navigation which I have.

Sending old unit to the US for repair ($150 repaired plus shipping)

Edited by Stayer
Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/
Share on other sites

You can get them fixed in Aust, but I believe the cost is significant. It would be worthwhile looking at the double DIN facia and an aftermarket head unit.

If you want to keep a factory type unit, you could post it to the US for repair. Or you should be able to pick up a 2nd hand G35 head unit for less than $300. I picked up a bose G35 head unit for US$170. If you decide to go down this route, you have the obvious risk of it not working when it gets here.. If you go new or 2nd hand from USA, make sure you buy like for like (bose with navi with a G35 bose with navi), then it should be a simple swap. And the G35 HUs can play MP3 CDs.

The hard part will be getting your CDs out of the old unit.. I believe it requires major surgery..

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6426268
Share on other sites

You can get them fixed in Aust, but I believe the cost is significant. It would be worthwhile looking at the double DIN facia and an aftermarket head unit.

If you want to keep a factory type unit, you could post it to the US for repair. Or you should be able to pick up a 2nd hand G35 head unit for less than $300. I picked up a bose G35 head unit for US$170. If you decide to go down this route, you have the obvious risk of it not working when it gets here.. If you go new or 2nd hand from USA, make sure you buy like for like (bose with navi with a G35 bose with navi), then it should be a simple swap. And the G35 HUs can play MP3 CDs.

The hard part will be getting your CDs out of the old unit.. I believe it requires major surgery..

thanks for that! where did you get it from if you don't mind me asking?

also, isn't the G35 unit you bought comes from Series 2 G35? I believe Series 2 (2005) V35s had MP3 player already.

I would be happy to get Series 2 Head-Unit with MP3 function, however, not sure if it would fit Series 1 as Series 1 has climate controls inside it and Series 2 doesn't.

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6426415
Share on other sites

That's a good point, you will need to get a S1 deck if you have a S1 V35. I believe the connectors are different between the S1 and S2. Also, as you know, the face panel is different, and you will probably need this from the G35 too.

The S2 V35 doesn't play MP3s.. it does had a MD player, perhaps that is where the confusion has come from? That is the main reason I got the G35 HU, as I wanted MP3 playback. and it was cheaper than the Double DIN setup or the iPod I/F.

I found mine on the G35driver 'for sale' section. They pop up on there every now and then.

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6426502
Share on other sites

I had the same issue when I got my car ages ago. I simply removed the unit and give it a nice kick, then all the CDs came out, but mine had other issues (no sound at all) you might wanna give it a go. Remove the unit and shake it a little bit. or better replace it with a 7" DVD player as I did.

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6437465
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

sent 3 of you the link too

to be clear, that's the link to the offer of repair service

however, after I told him that I'm from Australia, he offered me to sent CD-Mechanism for the cost of repair to save me on shipping costs

also, CD ERR F0 may results from different problems (electrical, for example), mine was purely mechanical as CD-Mechanism stuck while I was changing disks on the move

so, talk to the guy about your problem

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6492626
Share on other sites

  • 5 months later...

I do like how you said "the car had just 40k on clock when bought." .... I haven't seen a V35 go through the Jp auctions with 40k on it since about 2005, yet you can find them all along Parramatta Road and other similar places with these sort of km on them. Truth be told for under $100 a guy can come out and make your odo say whatever you want. Just sayin'.

Link to comment
https://www.sau.com.au/forums/topic/403882-cd-err-fo-fix/#findComment-6727225
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...