Jump to content
SAU Community

Recommended Posts

Hey hey hey

Ive always wanted to try the Subaru upper engine cleaner. Heard of them being used on subies, evo's, vw's. So why not get rid of some carbon build up in the gtr?!

Bad idea? Please tell me why?

Yes I have searched, yes they are all in 2006 and one I found was in 2003 lol.

Question time. Where do I spray it? Do I take my intercooler pipe off the plenum and spray the first 1/2 of the can in there? Then after that where do I spray while its running?

Thanking you.

Link to comment
https://www.sau.com.au/forums/topic/404398-lets-talk-upper-engine-cleaner/
Share on other sites

So far,

  • Do it before a oil change
  • Spray 1/2 the can in each individual cylinder (thanks silvia guys)
  • Do the other half while the engine is running through a vac line
  • Make sure it is well ventilated (some videos are crazy haha)
  • Get it from Subaru dealer
  • The more smoke the dirtier your engine was
  • Its the ducks nuts

id be interested to know if anybody has had any bad experiences with it...

anybody?

i used a can on my old sonata and it seemed to make it smoke even more and use more oil.... (tho its got over 250k kms on it n they are shit engine...)

Still got a can sitting in there so wondering if i should run it thru the RB25...

turbo seals? O2 sensors? high flow cat?

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

The subie stuff is only $18 per can. Did it f**k your cold start valve? havent heard of the subie stuff needing to reset idle nor taking out the cold start valve. Maybe this is a skyline thing

been thinking about this stuff as well, think I'll see what my mechanic thinks next time I'm in there.

Some Mainlube engine flush probably wouldn't go astray either for the oil system!

I like your thinking. Let us know what your mechanic says

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

I've used this sort of thing many times in a few different forms (ie nulon, wurth, AC delco etc.) and so far have found the subaru one to be the most effective. The main thing to BE AWARE of is that i believe the fumes are carcinogenic, so ALWAYS be in a well ventilated (preferably outdoors) area, and use caution while spraying. Aside from that, follow directions on the Subaru can, and have an explanation ready for when the CFA arrive :).

  • 1 month later...

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

its also rubbish compared to the subaru stuff, i use the subaru stuff in everything

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

yeah iv never noticed a difference after using it.

Only difference i ever noticed was a bad one. Used it on a 2.0 4cyl Sonata with 250k on it. It blew a tiny bit of smoke beforehand and used a bit of oil. After some upper engine cleaner it blows smoke like a mother f**ker, especially from the valve seals (i pity the people that are behind me at the lights after sitting for a while) n it uses bulk oil now.

Never again.

The only time i can think it would be a useful product is as a repetitive preventative product in motors that are prone to build up. Otherwise its probably not going to move anything substantial (like injector treatment) and if it does itl probably create a problem in a car that is otherwise running ok...

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...