Jump to content
SAU Community

Recommended Posts

hey guys. does anyone here have a spare 33 gtst fuel pump that i can buy of them? and how much?. or even to borrow?

my car is so screwed.. i think my pump is about to go, i drive and it randomly starts choking as if im out of petrol and it even stalls on me while on the hwy!! and i have to kick start! going 100kms hour!! sometimes around corners! LOL. even when it is idolling it sounds like misfire and stalls and comes back on.. and i give it a few revs then its fine again..

i may need to buy some coil packs and maybe even injectors to be sure.

if you have fuel pump, or coil packs or perhaps injectors you dont want, please be sure to pm me! asap if possible.

Link to comment
https://www.sau.com.au/forums/topic/404614-looking-for-an-r33-gtst-fuel-pump/
Share on other sites

You would be Better served to get a Bosch 040 to replace the stock pump if that's the issue. Stock pumps are all old and tired now...

I have the stock s2 injectors and afm if you need to borrow them to diagnose the issue, but I don't want to sell them

I agree about the afm sounding like the issue, mine did this when I was getting reversion from the bov.

Do you still have the stock bov?

Edited by Mitcho_7

Stinkypoo: i have a series 1 r33 gtst. does 32pumps fit?

Mitcho_7: i was thinking of buying the bosch. might as well. also it would be great to borrow your afm and injectors for a few weeks to test seeing as im only free during weekends to be able to put the injectors in. and no i have an after market hks sequencial bov.

Edited by LiL_JeT

We just put my AFM in his car to see how it goes.

His one looks to be covered in blow by oil so it might fix it.

Also goin to try a new fuel filter because it's never been changed and go from there.

His also going to put the old plumb back BOV to see if this helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...