Jump to content
SAU Community

Recommended Posts

hello everyone,

im looking for a pair of R33 headlights, the ones that are in my skyline now have seen better days, they leak and no matter what i do i cant seem to get the plastic on them clear. I got a new pair priced and they want $650 EACH. So if anyone knows of a good secondhand place or are selling a pair of good quality headlights please let me know..........thanks.

liz :headspin:

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/
Share on other sites

Series 1 or 2?

S2 is probably twice as expensive.

Unfortunately GOOD clear, non hazed lights are something like $650 - $700 a pair.

The ones you see for $300 or less are really rubbish ones off a 1993 that have turned yellow in the sun. Notice the bottom is painted black and as it ages, it goes clear.

I supplied one to someone on the forum here and I think he's happy with it (Where are ya Chris?).

Mine are good now although I suspect my left isn't watertight - it mists a bit and dries out in the sun.

Here's some pics of my new looking lights...

http://www.nitroware.net/~tony/xenon1.jpg

http://www.nitroware.net/~tony/xenon2.jpg

http://www.nitroware.net/~tony/xenon3.jpg

If you're really stuck, gimme a yell and I'll see what I can do - I fixed mine ages ago after lots of hunting around.

T.

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-831258
Share on other sites

Tony, I'm assuming that your headlight mists up regardless of the weather conditions. That would indicate that it is still water tight, because rather than "drying up" it's just turning to vapour and staying in there to recondense when it cools off again.

If that's the case, what you wanna do is to take out one of the head light sockets on a dry warm day (ie not humid) and leave it out in the sun for a couple of hours. That will give the water vapour a chance to escape. Then put the socket back it.

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-831639
Share on other sites

Hey Tony :)

The headlight I bought from you was nice and clear but looks like it has a leak somewhere as well or perhaps some water got in somehow and hasnt been able to evaporate out since. It still looks 100% fine most of the time except after a decent rain but im not that fussed.

The best way to restore a R33 headlight ive found is to just use some metal polish or any abrasive cleaner on the front outside plastic.

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-832776
Share on other sites

The best way to restore a R33 headlight ive found is to just use some metal polish or any abrasive cleaner on the front outside plastic.

With the frequency of rain in Sydney, that's not too big a deal!

The other way you can fix old lights is to get a smash repairer (someone you know preferably) to remove the light, use abrasive cleaner and polish and sand and respray the bottom of the light black.

Of course the removal and labour is expensive which is why this is a DIY thing or unless you have a mate in the business.

My mate said he'd do mine for $80 a pair but in the end, it is typical that I'd take the most labourious and expensive approach...

T.

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-835046
Share on other sites

  • 2 weeks later...

To get the yellow off the lens of your headlight, get some car polish and a good rag and test it in a small area first...make sure u use just straight polish and not cut and polish or else it will scratch ur headlights...give it a go its worked for me

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-855048
Share on other sites

hello everyone,

im looking for a pair of R33 headlights, the ones that are in my skyline now have seen better days, they leak and no matter what i do i cant seem to get the plastic on them clear. I got a new pair priced and they want $650 EACH. So if anyone knows of a good secondhand place or are selling a pair of good quality headlights please let me know..........thanks.

liz :headspin:

Hey there r33bdg1rlnsw,

You can buy a gel type cream especially for this task.

Here's the ad:

HEADLIGHT CLEANER SUIT

R33, SOARER OR ANY

PLASTIC HEADLIGHT $19.99

www.justjap.com

Hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/40476-r33-headlights/#findComment-855072
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...