Jump to content
SAU Community

Recommended Posts

Hey guys,

Just bought myself an R33 Series 2 GTS-T, which is my first venture into the import scene and so far I don't understand why the entire world doesn't drive around in Skylines.

Anyway I'm looking at replacing the ragged set of wheels on my car and came across a set of BBS rip-offs in Melbourne on eBay.

I'm just wondering if anyone has had any experience with these wheels or this company and I'm just wondering if they're any good.

This car is my daily, so I'm not looking for anything that will withstand days of beatings on the tracks, just a set of wheels that look nice and won't crumble to pieces on the way to work and with an occasional squirt here and there.

This is the link to the wheels.

http://www.ebay.com.au/itm/Set-4-BBS-LM-Styling-19-5x114-3-Staggered-Alloy-Sport-Rims-Mags-Wheels-/170868864977?pt=AU_Car_Parts_Accessories&hash=item27c893f7d1#ht_3778wt_908

Cheers guys,

Daine.

Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/
Share on other sites

damn nice looking wheels :yes:..

problems with cheap, not so popular rims, especially in large sizes where you run skinny tyres...1 decent pothole and its game over

they dent easily and you will have a big dent in a rim thats often hard to get a replacement..

I have seen a few of these selling around, so may not be as much issue.

but it really sux when your nice set of rims is useless cause one is busted....

Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/#findComment-6444677
Share on other sites

Damn that sucks. Whyalla isn't too bad for potholes but when I go back to Kadina I'm sure these rims would get annihilated.

Too bad genuine BBS wheels are worth like 1k each.

I reckon I'll either get these or a set of speedy cheetahs but it will all depend on the size of my tax cheque ;)

Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/#findComment-6444684
Share on other sites

Too bad genuine BBS wheels are worth like 1k each.

Genuine BBS LM in 18x10 are around $2k brand new (at least they were in 2010).

Their other models are cheaper but not the LMs.

I'm not sure what the price would be for 19" rims as I can't find the site (pretty sure it was AMG but I couldn't find the LMs on there).

Edited by writeoff
Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/#findComment-6444761
Share on other sites

I wonder if I could get 9.5's on the front and 10.5's on the back without too much stuffing around.

Do you reckon 9.5's would even fit on the front? Reading through the thread now and everyone seems to have 8.5's on the front.

yeah you can do that depending on offset..but the beauty of wearing same size shoes all round is you can rotate your tyres for longer life, im assuming if you cant afford genuine bbs rims you dont want to be forking out for tyres too often either..(.I know I dont ,) so get something affordable, cool and long lasting ;)

Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/#findComment-6444786
Share on other sites

varrstoens are fine man. just dont run thin tyres and you'll be fine.

ive got the te37 copies and wrapped them in 275/35 and 245/40 both 18's ive hit a few pot holes. no problems.

i found that most people that have snapped a wheel are generally stance fanboys that run stupidly stretched tyres eg 225/30 on 11" wheels(yeh thats really not asking for it lol)

18x9.5 fit all round with +25?? offset..look shit hot too...read the wheels thread

http://www.skylinesa...s-for-skylines/

+1

Link to comment
https://www.sau.com.au/forums/topic/404781-bbs-rip-offs/#findComment-6451242
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...