Jump to content
SAU Community

Recommended Posts

Hey guy's and gals

I have a n/a 34 with a stock exhaust setup .

Now what i need to know is what is the best sort of exhaust i should fit to my beloved skyrine

Would it be a custom made 2.5" , Or would it be easy/cheaper to buy a 2hand one for a GTT that some1 else has spent the cash on ?

Any info in this or a custom made one would be a help

Many :thanks:

P/s don't flame a n00b for asking plz just dont reply !!! :devil:

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/
Share on other sites

Your best bet is to find a kakimoto or fujitsobo one as the made cat backs specifically for the n/a they are also good quality. You could go down the custom path and get a full system with ceramic coated extractors etc. but the custom extractors won't be tuned they will most likely do a copy of the stock manifold but in stainless :) if your on a budget try eBay or your local wreckers for one :)

Any more q's just ask!

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6446392
Share on other sites

Check out CES Racing www.cesracing.com.au/ if you are in Brisbane and enquire about having them make you up a custom exhaust system with headers for you na skyline, you will not be disapointed with the quality that these guys produce and the hp gain you will get from a full extractor/header system through a 2.5" system. Will cost you some $$$ but trust me you will never regret it.

If you want cheap then the above mentioned systems will do okay!

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6447495
Share on other sites

will be pretty hard to find one here as the N/A skyline market isnt big lol. cheapest bet is to find a second hand one or you can buy online or try import monster or hayatonka, if your in bris then like lowbro said try ces. it all comes down to how much your willing to spend.

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6447906
Share on other sites

TBH - The restriction on a non worked 25 will only really be the cat converter. One thing we got to remember is that the engine is still a 2.5L with no turbo or any cam mods.

The stock exhaust is pretty big for what it is.

Slap on a high flow panel filter and high flow cat. It's all you will need. Anything more is just for noise.

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6451464
Share on other sites

TBH - The restriction on a non worked 25 will only really be the cat converter. One thing we got to remember is that the engine is still a 2.5L with no turbo or any cam mods.

The stock exhaust is pretty big for what it is.

Slap on a high flow panel filter and high flow cat. It's all you will need. Anything more is just for noise.

Good advice, thats pretty much it a hi-flow cat and your set i dont do noisy exhausts myself i prefer to listen to the engine.

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6451748
Share on other sites

^^ Jake^ Stop posting about the Search function it dont really work that well... and why would you go into this just to say that!! (sad)

My god some ppl have far to much time on there hands...

Why dont you go find some info on your super search function that us N/A boys will find helpfull and stop being a cry baby.

...................................................................................dont do it................................................................................................................

Link to comment
https://www.sau.com.au/forums/topic/404879-r34-gt-exhaust/#findComment-6464184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...