Jump to content
SAU Community

Recommended Posts

Hey guys I'm currently making 307rwkw with the following fuel setup ( custom fuel rail, 875cc injectors, adjustable fuel reg and a 044 pump ) an of corse the supporting mods to make that power. My question is I'll be doing some more work on it very soon and aim for 350rwkw is my current fuel setup enough for that power or should I be looking at doin a surge tank and another pump?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/404975-fuel-setup-for-350rwkw-r33-rb25/
Share on other sites

What car and fuel? On 98 it should be fine, on E85 those injectors might be a bit on the small side. You might also run into problems with your fuel lines, I've seen a few cars hit a wall in power at ~320rwkw with the standard fuel lines a restriction. Others have gone over 400. The pump will be pretty close to it's limit, but should still be ok.

360 kw on E85 here..... O44 is maxed on its safe limit, injectors and rail are ok (1000cc)...... Standard fuel line needed to be replaced in mine BUT pretty sure 33 won't need to be :)

I couldn't find his sig cause I'm on my phone:/ will check it out tonight on the puter.

Because I'm a nice guy ;) This is Matt's sig list:

Engine: Haltech PS2000, Wideband setup, ethanol content analyzer, GT3037-56T (.82 rear) with custom braided lines, Tial 44mm MV-R gate, custom dump pipe with heat wrapping, high flow cat and Apexi exhaust, HKS EVC 5 Boost Controller, 6Boost Manifold, Tomei 260 Type B Poncams, Exhaust cam gear, Gates Racing timing belt kit, Aftermarket Springs & Retainers, 4"intake with drift pod filter in custom JJ airbox, Plazmaman Pro series intercooler, Plazmaman piping, Plazmaman intake plenum and 66mm throttle body, Splitfire coil packs, GFB respons BOV plumbed back, Powdercoated covers by Craved Coatings, Black Works oil cap, Alloy Radiator air defelctor

Fuel: Bosch 044 fuel pump, XSPURT 1000cc injectors, HKS fuel rail powdercoated black by Craved Coatings, Billet fuel filter, SARD fpr, speedflow fittings.

Drivetrain: Exedy Cushioned Button clutch, Nismo 1.5 way diff, Nismo shifter.

Suspension: Tein SS coilovers, Front ISC adjustable caster rods, superpro camber kit, 27mm Selby swaybar. Rear ISC adjustable camber arms + Traction rods, Alloy locking rings & 24mm Selby swaybar.

Wheels & Brakes: 18" Works XT7's (F8.5 R9.5) powdercoated black, Kuhmo KU36 tyres, HEL braided lines, Endless front pads and rotors ,Endless pads rear.

Exterior: Carbon weather shields, Eyelinds & Bonnet lip.

Interior: Brown Davis Roll Cage, drift harnesses, Pioneer/Alpine/Fusion stereo.

Edited by Hanaldo
  • Like 1

Well Matt has always been a nicer guy than me! :P

Price for converting to E85 is pretty subjective mate, there's so many ways to do it. I've seen quotes from as low as $1500 all the way to $5000+. The way I believe to be the best and the way I would do it is also the way Matt has done it. Not cheap though.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...