Jump to content
SAU Community

R33 Gtst Blowing White Smoke Plus Car Potential.

BOOSTBIG
 Share

Recommended Posts

BOOSTBIG Contributor

BOOSTBIG

Posted
  • Author
Posted (edited)

The guys at cv performance recommend me saving for a vipertech ecu and 650cc injectors. told me not to get anything less than that.

Edited by BOOSTBIG
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

a vipec is a better ECU no doubt, but if you are going for a highflowed turbo you aren't going to need anything more than a pfc / nistune

you will also need a z32 afm, 555cc injectors (minimum) aftermarket fuel pump, FMIC, better clutch etc etc

best search around here before you buy stuff.... have you already paid for the turbo?

the turbo you chose will influence everything else you need

BOOSTBIG Contributor

BOOSTBIG

Posted
  • Author
Posted

a vipec is a better ECU no doubt, but if you are going for a highflowed turbo you aren't going to need anything more than a pfc / nistune

you will also need a z32 afm, 555cc injectors (minimum) aftermarket fuel pump, FMIC, better clutch etc etc

best search around here before you buy stuff.... have you already paid for the turbo?

the turbo you chose will influence everything else you need

damn :( the turbo is alread payed for and installed.

already have a fmic, exhaust, pod filter.

damn I thought the garret internals would put out decent power. I was going to upgrade to a bigger turbo in a couple of months though. just wanted something with a decent kick untill I go all out on a high mount kit.

what do you recommend?

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

depends on what you want to do with the car.

a highflow will get 300rwkw TOPS and that's pushing it. (i beleive hypergear have managed the 3 ton but generally highflows are 260-270rwkw

having said that have you driven a 3oorwkw R33? it's FAST

looking for more power than that out of a 2.5l will only lose response, and response where it's at (in my opinion)

i'd rather have a 250rwkw Rb25 than a 400rwkw RB25 anyday

BOOSTBIG Contributor

BOOSTBIG

Posted
  • Author
Posted

depends on what you want to do with the car.

a highflow will get 300rwkw TOPS and that's pushing it. (i beleive hypergear have managed the 3 ton but generally highflows are 260-270rwkw

having said that have you driven a 3oorwkw R33? it's FAST

looking for more power than that out of a 2.5l will only lose response, and response where it's at (in my opinion)

i'd rather have a 250rwkw Rb25 than a 400rwkw RB25 anyday

your awesome man cheers. great great advice! I know where I stand now :)

nope never driven a 300kw r33 but I have driven a vl turbo 270kw on the weekend and it was scary fast. thing was spinning the wheels right up to 4th gear on boost. was hard as hell to control!

Chris_Beli Collaborator

Chris_Beli

Posted
Posted

Hey man Im in a similiar situation too you, replaced my stock turbo as it was on the way out and the replacement now causes my stock AFM to max out so I need nistune and AFM too, I don't know where your located but I looked up a guy named toshi on the forums who can do a nistune for you for a fair bit cheaper then most places, pretty sure he's in Sydney maybe get in contact with him for your tuning? I plan too when I have the coin

BOOSTBIG Contributor

BOOSTBIG

Posted
  • Author
Posted

Hey man Im in a similiar situation too you, replaced my stock turbo as it was on the way out and the replacement now causes my stock AFM to max out so I need nistune and AFM too, I don't know where your located but I looked up a guy named toshi on the forums who can do a nistune for you for a fair bit cheaper then most places, pretty sure he's in Sydney maybe get in contact with him for your tuning? I plan too when I have the coin

Thanks heaps man. I'm located in dolls point sydney. so expensive for a ecu and tune though...wow!

I spent so much money rebuilding the damn thing now I'm hit up for another couple of g's :( it never ends

should be worth it though. I'f I get done I'll let you know how I go :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...