Jump to content
SAU Community

Recommended Posts

Well just at a glance, compared to mine,

its got a body kit thats not mentioned in the ad,

Indicators on the guards, i dont have,

Wheres the import plate and build plate? they should be there on the firewall but there not. so it could be really dodgy.

Speedo numbers are wonky, so the k's are whatever, who knows.

Another indication of lots of kay's is the seats were replaced with unworn ones, and the gearshift and handbrake boots.

I bouhgt a 12 year old volvo with 200,000 kay's and the interior is like new, so.... heaps of stuff will need replacing on an old 32

How old are they now, 22 years? If theyre sht they are sht i know i got one.

A bit harsh i know but be careful.

Ps there all sht compared to sins 32, so he cant tell.

:w00t:

Edited by D.I.Y. Mik

My GTR doesn't have indicators on the guards when others did.

I think some cars may have had them added when they came to the country.

As for seats and k's you never know what happens with these cars or what's been replaced it's really luck of the draw. Only thing you can do is get a mechanic or someone you can do to check it out and hope for the best really.

Thing is, they're at an age where if they haven't had things replaced they are shit. Even if they look pretty often they need a lot of work.

DIY Mick is spot on - Build and Import plates missing (Dodgey!!)

Speedo is aftermarket anyway. Add 40-60 thousand K's to the reading.

Side blinkers are at the discretion of the importer for compliance and local RTA during inspection.

Look for rust in and around the boot, lots of under body tar etc and like others have said, worn steering wheels, handbrake leather etc to indicate if kms are real.

Definently ask about the plate in the engine bay and compliance papers etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...