Jump to content
SAU Community

Cusco Lsd Help Needed

chinna

By chinna,
in Classics (1953-1988)

 Share

Recommended Posts

chinna Collaborator

chinna

Posted
Posted

hey guys

i am buying a cusco 1 way lsd for my r200 open diff

problem i have run into is the lsd for a HR31 and R30 long nose

are listed as different part number by cusco

hr31 is LSD 162 f

and r30 models are LSD 161 f

i have looked every were and no one can tell me what the difference is

i have brought my R200 from a HR31 from what the seller said

and it was an open diff which i know some came out with in the lower spec ones.

the only thing i have been told is that HR31 the crown wheel bolts are 12mm

and r30 are 10mm is this right

thanks

Link to comment
Share on other sites
rb26zed Enthusiast

rb26zed

Posted
Posted

I believe then only differences between any of them are the crownwheel bolt sizes, which can be easily rectified with sleeves, and the position of the half shaft circlips.

My best guess would be that the circlip positions would be the same between those 2 models, so the crownwheel bolt sizes would be the only difference I would think. This can be sleeved easily enough.

Link to comment
Share on other sites
ydr030 Mentor

ydr030

Posted
Posted

dr30 r200 crown wheel bolts are definatly not 10mm. they are 14mm.

im not sure on differences but my mates hr31 has same diff as my dr.

both styles of cvs are interchangeable.

wouldnt bother with a cusco 1 way any way, just add more clutch packs

Link to comment
Share on other sites
chinna Collaborator

chinna

Posted
  • Author
Posted

i am getting one though a mate from japan cheap brand new

my diff started life as an open long nose i though the bolt size was the only difference thanks for the help

i don't want 2 way its just a weekender

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kip
      Kakimoto Exhaust - What Do I Have?

      By Kip · Posted

      Thanks, Duncan. This is good info. The pipe is 3+" in diameter. I assume the cat is the biggest flow impediment right now. Then again, the fiberglass packing came shooting out of the car when I put it on the dyno, so I'm kind of de-catted at this point. I'm going to get under the car tomorrow to change the oil. I'm hoping I can scope out the downpipe and turbos.
    • MBS206
      MLR's Bogan cruise ship

      By MBS206 · Posted

      Seats would really give the interior a huge makeover. And as it's a bogan cruise ship, you don't need hugging seats like a race seat, or material that'll hold you stupidly tight in the seat.   I say go for it. If minister won't approve a trip away, it'd probably be $650 return to ship the car down and back, just tell her it's at the mechanics, and woah, you don't know how the seats became leather!!!
    • Duncan
      Kakimoto Exhaust - What Do I Have?

      By Duncan · Posted

      It really doesn't matter much who made it, unless if is obviously poorly routed or restrictive in a section; what matters is the nominal cross section. For most normal-medium power you go 3" from the cat back for a good combination of free flow and retaining ground clearance. Front and dump pipes are tricker to get in larger sizes and are the most common restriction
    • Kip
      Kakimoto Exhaust - What Do I Have?

      By Kip · Posted

      Been poking around on the new to me car. I've determined that I have a Kakimoto exhaust from at least the downpipe back (I haven't confirmed the downpipe yet). It has a catalytic converter. Other than the company branding on the exhaust tip, I can only find one other marking. Behind the cat and under the car is a plate that has the numbers "NF307FP" and "M11111". Unfortunately, the Kakimoto website is written in Japanese and my browser won't translate it. I found that Nengun sells the brand, but my exhaust doesn't look like their current offering. They do indicate that each pipe is custom made, but I assume that's more of an inventory control thing than some sort of special, vehicle specific tuning. Anyone have a guess about what I have here? I'm getting ready to throw some dollars at tuning this car, but want to make good decisions. No reason to throw out a perfectly good exhaust system, if this thing will equal a full custom build.
    • Kip
      C34 RSFour V Build in the US

      By Kip · Posted

      Congrats on the progress. That's got to feel good to get the build done/mostly done. Now that you're this deep into it, I'm curious if you'd do it again versus finding a 5MT from the get go?
×
×
  • Create New...