Jump to content
SAU Community

R33 Gtr Frp Doors

CameronBNR32
 Share

Recommended Posts

CameronBNR32 Proficient

CameronBNR32

Posted
Posted

Looking for an Australian supplier/manufacturer of FRP doors for a 33 GTR track car.

I am after doors that are as light as possible, but cannot justify the price of carbon fibre ones...

I have only been able to find overseas manufacters so far, and the only local ones I have found do not make doors for the R33.

Any help greatly appreciated!

Link to comment
https://www.sau.com.au/forums/topic/405937-r33-gtr-frp-doors/
Share on other sites
CameronBNR32 Proficient

CameronBNR32

Posted
  • Author
Posted

JustJap dont list them for the 33's unfortunatly.

So far I have found:

New Horizon – their web site isn't working anymore.

Final Konnexion - http://www.finalkonnexion.co.jp/lineup/lineup_nissan.html

Rasty - http://www.rasty.tv/pro/door.html

There are alot of places that make FRP doors but only for the 32's and 34's

Tim GTR Proficient

Tim GTR

Posted
Posted

Hi, Pete and Guys

I would like to get 2 sets , one for S15 and one for GTR33 , at jus t a shade over 50,000 yen a set. that is very good value. please let me know how can I join the purchase and shipping for the Final Konnexion product.

Alex Cheung 0433878905

Braeside Vic 3195

See you guys at WTAC

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

I'm sure Import Monster could get em in on a container for cheaper shipping as well.

Yep! I'm sure Import Monster would gladly help you guys out with container and reduced shipping rates if you are all jumping in together... And Pete has run outta room with his latest junk run :P

I'll run it by Aaron early next week when I see him next either way. Hard to get estimates without knowing how many sets though

bri73y Proficient

bri73y

Posted
Posted

i think you will find they are not much lighter

all the wight is in the window slides and engine and glass

only way to make them super light is to go it a more race version with a fixed lexan window

Definately going with lexan for mine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...