Jump to content
SAU Community

Recommended Posts

Help! I have purchased an R32 GTS25 and am experiencing some engine problems. These problems include; occasional missing, occasional stalling and the occasional hesitation (by which I mean when I am accelerating the engine almost hiccups, it cuts out then comes back in accelerating). I have taken it to the local Nissan Dealership who originally diagnosed it as a faulty CAS. So I got that replaced and it didn't do too much, just made these problems occur less. However they still do occur... So I took it back they performed another diagnostic check and the DTC came back OK....

How do I fix these problems!! They suggested coils (which I replaced with "newer" 2nd ones 2 months ago), Igniter, AFM or the ECU?? Which would be the best plan of attack? Or is there something they missed??

Cheers Rich

Link to comment
https://www.sau.com.au/forums/topic/406478-help-rb25de-problem/
Share on other sites

did the coils make any difference at all? there is always the chance that they were no better than the ones you replaced. the ignitor is also worth looking at (if it is a serious 1 r33)

if possible, if you have a mate that also has a r33 you could try swapping parts with his car and seeing if you can isolate the problem part

No cat converter so thats unlikely haha, and no I also replaced the fuel filter about 2 months ago aswell so again unlikely

Yes the coils made a slight difference but I mean it wasn't like it was a game changer as the problem is still there. No, no mate that I could swap parts with, but will look into the igniter as yes it is a series 1 RB25de

iv got a very similar problem wiv my rb30 iv replaced all the same shit including distributor cap and rotor , leads n AFM and the power transistor next 2 the distributor. some1 has mentioned problems with the actual throttle body not sure though. when it plays up can u smell unburnt fuel?? mine stinks of it wen it stars randomly running like shit

If I do (most probably) end up replacing my AFM what would be the best replacement? As am browsing through trademe and to me they are all the same thing just different colours :/

As long as it's green sticker it should be the same. Double check the part number on yours matches the one your buying. 22680-02U00-?

http://www.skylinesaustralia.com/forums/topic/113284-fixing-your-rb26-afms/

  • 3 weeks later...

UPDATE:

Now my car doesn't start at all :/ It turns over but doesn't want to start, so I replaced my ignitor and resoldered the joints on my AFM (to try solve the original problem) but nothing changed, it still turns over with no motivation to start. Will be taking it into an auto electrician tomorrow hopefully.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...