Jump to content
SAU Community

Recommended Posts

Clearout time again. All items in Brisbane, can post, pickup, or maybe deliver if you're not too far.

Stainless split dump pipe and mild steel 3in front pipe with o2 sensor bung. Good cond, all welds intact. Good n cheap at $60

post-78602-0-80994000-1345017455_thumb.jpg

6x stock r33 gtst 370cc injectors. Bought them off a member here a while back with the intention of getting them cleaned so I could just do a swap with mine one weekend, but ended up having the car off the road for a while and got mine done so never used these. $60 the lot

post-78602-0-05531200-1345017678_thumb.jpg

Brand new adjustable cam gear. Got a set of 2 off ebay but only used 1. This is the good kind with the outer steel gear not aluminium. proven (on both of my cars) to give noticeably quicker spool and no loss of power or driveability. $45 - never used.

post-78602-0-04064300-1345017869_thumb.jpg

R34 series 3 Garrett metal not nylon compressor wheel, ceramic rear, OP6 turbine housing turbo. $300

post-78602-0-73929600-1345018052_thumb.jpgpost-78602-0-89926300-1345018192_thumb.jpg

R33 series 2 stock turbo, no shaft play, comp and turbine intact, but bearing blown or flatspotted, shaft still spins but clicks, needs rebuild. Good to send in as exchange so you can still drive around in meantime. $60 for you my friend.

post-78602-0-76204600-1345018178_thumb.jpg

R34 side mount intercooler, good as the day it came out of the factory but with the normal scrapes etc of being on a car since it did come out of the factory. In other words, still in good nic with no real damage. $70. No pics as it's in my other garage but can send a pic if needed.

R33 side mount intercooler, vgc. $20. Same deal, in other garage at moment but can get pics if needed.

if you where in melbourne id be all over that dump/front pipe and cam gear.

prob take that op6 for my 33' if i had 300 bucks too.

i assuming by the look of the cam gear its universal for exhaust and inlet? i'm after an exhaust cam gear, if it suits rb25 s2 exhaust cam i'll take it.
...definitely suits this, as that's what my car is too, and I put mine on exhaust cam.
if you where in melbourne id be all over that dump/front pipe and cam gear.
I have alot of faith in Australia Post my friend :). Let's make this deal happen.

lets have a laugh, i need one, my job is boring as hell today. what the postage worth on that dumper then?

I have alot of faith in Australia Post my friend :). Let's make this deal happen.

you must be the only guy in the world that does! :rant:

well, maybe....only $$$ paid closes the deal for me. Had someone else ask about that too, should be no more than $30 boxed and posted but will find out exat costs on Mon if y'all want to pm me your postcodes so I can get some prices n whatnot.

Have I gone mad? Quite possibly...but crazy low prices have arrived

injectors $40 the set, $50 for the r33 turbo, $200 for the r34 turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...