Jump to content
SAU Community

Recommended Posts

Went 11.2 at 129mph with a 1.7 sixty at powercruise lays Friday night. did a 1second 130mph pass.

now this has to take in to consideration I drive like a nana through the heard.

Previous engine combo seen 11.3 at 124mph (Benaraby) 125mph Willowbank.

And the engine combo b4 that was 12's. Have dyno sheets and pass slips for anyone that interested.

  • 3 weeks later...

Awesome times

What tyres/width are you running? Suspension setup?

Running federal 595 RSR's @ 20psi 265/35/18

I've got ohlins coilovers, and not much else extra suspension wise, rear adjustable arms to stand the wheels up straight. All the bushes are new. Was trying so hard to get into the tens. Might have shaved a tenth on my 130mph pass but I will never know.

Well I took my 34 out for a laugh.. And found the first weakness = Clutch

First pass was 14.12 @ 104.3mph lazy take off, second pass clutch failed 13.70 @ 90.8mph.. only got worse after this.

Yes I raced on balloon tyres 285/35/19's with 38psi in them

Only 2 mods are Exhaust @ Pod filters, so pretty much stock

Will have a new clutch fitted in the next week or so and head back out. Good fun

Noy

  • 2 months later...

I just ran our NITTO R34 GTR at the drags on saturday at Willowbank.

Ran a 10.39@142mph on Hero 255/30R20 tyres, Tein Monoflex coilovers, OS88 gearbox, standard 05U rb26 with precision 7675 turbo making 845hp @ all four wheels.

1.77 60ft

4.69 330ft

6.9 1/8mile (107mph)

8.799 1000ft

10.39 1/4mile (142mph)

  • Like 1
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...