Jump to content
SAU Community

Recommended Posts

Poor fella must be devastated, hes lucky he didnt get hurt more from the bar falling on him.

He must have some sort of underlying bone issue. Especially when you consider that he lifts 4 times or more a week and should have really good bone density due to the stress of lifting stimulating appositional bone growth an remodeling.

Edited by Mitcho_7

sooo I have suspected disk prolapse between L4 and L5... spine is a long way out, I lean to my left which is probably what has caused it... my lumbar is also very compressed, along with some other more minor issues in my mid back and neck

I have 4 weeks of treatments twice a week... Chiro pretty confident he can fix me up in that time and reckons I'll come back much stronger... thinks I've been leaving a lot of strength on the table being as misaligned as I am... I didn't ask if I'll make Nats, I guess we'll wait and see

Happy to train through knee, shoulder, elbow pain etc but don't want to stuff around with my back... will be doing what he says (he's a fellow powerlifter)

have the all clear to keep benching/pressing... just no overhead work

Jason Mawby

http://www.mawbychiropractic.com.au/

He won't adjust you without a full spinal xray... They are in Rosebud and will refer you to an xray place down there but I'm sure you could get them done anywhere

Went and saw him first but I guess you could have some xrays done first

sooo I have suspected disk prolapse between L4 and L5... spine is a long way out, I lean to my left which is probably what has caused it... my lumbar is also very compressed, along with some other more minor issues in my mid back and neck

I have 4 weeks of treatments twice a week... Chiro pretty confident he can fix me up in that time and reckons I'll come back much stronger... thinks I've been leaving a lot of strength on the table being as misaligned as I am... I didn't ask if I'll make Nats, I guess we'll wait and see

Happy to train through knee, shoulder, elbow pain etc but don't want to stuff around with my back... will be doing what he says (he's a fellow powerlifter)

have the all clear to keep benching/pressing... just no overhead work

Did he say if the heavy lifting might have contributed to it?

Did he tell you to stop the heavy lifting or go easy for a while?

I hurt it while deadlifting, no doubt about it... only because I was lifting whilst badly out of alignment... I'm sure I would not have had any issues had I been seeing someone to have maintenance work done instead of waiting til I hurt myself

I pulled 200kg x 5 for 3 sets... then deficit deadlifted 180kg x 8 and 160kg x 13 (to failure)... I'm pretty sure I did it in that last set... I was fatigued and let my form go, plus I was lifting from a deficit and it's already hard for me to get down to the bar and setup correctly... I was then very stiff in that area for the next week but kept lifting anyway... on my next DL session I warmed up a lot because of the stiffness but everything felt heavy... my top sets were supposed to be 215kg x 3 x 3... I pulled the first set and only barely managed it... felt like I strained something and immediately it started to hurt

he said no deads or squats for the time being... no overhead lifting or anything that compresses my spine... I'll get the treatment and as soon as he clears me I'll get back to it... I'm already seeing improved movement every day and I've always healed quickly so fingers crossed

Yeah hope it gets sorted soon.

I guess the qn to ask is are you still keen on lifting big weights now this has happened to you?

After I hurt myself, and nowhere near anything like you did, I qn whether there is any need to lift heavy. You compete but I don't.

I probably shouldn't have these thoughts in this thread................. Lol

it sounds a lot worse than it is... I'm really not in that much pain, just uncomfortable bending over and sitting for long periods

I can't wait to lift heavy again... I don't feel right not having squatted for nearly two weeks lol

However I won't be lifting heavy unless everything feels right in that area and I get the all clear from the Chiro... I won't ignore it again

I had this week off except for a short bench session but I'll be back into 4-5 sessions a week next week... lot's of bench pressing, supported rows, pull ups, dips etc

TTT: thanks mate... I'll be pretty gutted if I miss Nats... never thought I'd ever do a bench only comp lol! But if I'm not healthy then I'll live to lift another day... I'm sure there will be some other comp I can do later in the year

will be a pity because I hadn't missed a rep in training and was programmed for a 610kg total... think I could nudge 620kg fully healthy too

shit happens, people have come back stronger from a lot worse injuries

Jason Mawby looks after our entire team, he has totalled 600kg@100kg, his wife also competes.

He fixed up Nina and Max, they still get alignments every fortnight, I think he has around 30 clients from PTC

Emad is out of hospital. What was supposed to be a 1hr op lasted 3. His bones are like concrete, they struggled to drill through them

Dr Bruce Reid and Dr Peter Larkins believe there was a stress fracture there that the MRI didnt pick up

He has a titanium rod running through his humerus now. He was in the gym today.

Nick, you'll be fine if you listen to Jason, we work together, we have a 100% success rate. Max started squatting an empty bar after Jason realigned him, he is about to squat 250kg x 4.

You wont recognise the place when you walk in lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...