Jump to content
SAU Community

Woo Hoo Dump Pipe Finially Arrived


Recommended Posts

Originally posted by Black33

inasnt, I ordered the exact same dump from arrow diffs as well. its good cos he sent it cod and mine should arrive tomorrow

:D

u bastards! now he has a whole stack of lasercut flanges so it wont take em long to make up the new 1's!!

  • Replies 152
  • Created
  • Last Reply

Top Posters In This Topic

nah, I don't think so cos when I spoke to him, he had just made this "batch" up (his word - like he just took some cookies out of the oven) from the laser cut flanges he had just received.

anyway, he said that he made up a bunch (maybe 10) and he must have sent you one of those, and then when I spoke to him yesterday - he only had about 2 left - so I got one of the last ones. :D

Have you measured the diameter of the pipes at the turbo flange side? wanted to know how big the wastegate pipe is.

Originally posted by Black33

nah, I don't think so cos when I spoke to him, he had just made this "batch" up (his word - like he just took some cookies out of the oven) from the laser cut flanges he had just received.  

anyway, he said that he made up a bunch (maybe 10) and he must have sent you one of those, and then when I spoke to him yesterday - he only had about 2 left - so I got one of the last ones. :D

Have you measured the diameter of the pipes at the turbo flange side? wanted to know how big the wastegate pipe is.

the guy u r talking to i am assuming is Rama! he talks abit of shit!

Mine was the original order with 1 other that he had to do before he got the whole bunch of other orders. thats y he sent me mine quickest, 4 weeks is still 2 bloody long.

i will measure the wastegate hole when i get home, they could have made that pipe a bit bigger!

Originally posted by Black33

thanks man, yeah thats what i thought from the pics - but he said it was 1 1/4 or 1 1/2 inch and that what the ones at jms are, so I guess it's ok

when u planning on putting your in?

mines going in on friday, with new plugs and s-afc tune!

mines going in on saturday along with a front pipe being made up and having my cat flanges flared out to 3" at a place in south yarra!

(SAFC to come later for me)

I just spoke to rama and he said that wastegate pipe is around 35 mm (between 1 1/4 and 1 1/2 inch). he made a good point by saying that the hole for the wastegate is samller then this so this size is more then enough - anyway if the wastegate pipe didn't flow enough, all it would mean is a tiny bit more boost under high revs :D

Originally posted by Black33

yep, was gonna do it on sat at ice but thats the only time I can get the dump etc fitted so will have to wait till next saturday!

what would you estimate I'll be on after the dump front etc? (have bleed set at 10psi, airinx pod, cold air partition and super drager)

what will I then get to with a tuned safc later??

its hard to say with different cars and different dynos!

come down to calder this sunday and see what u can run in the 1/4 mile, thats the best indication of power!

Originally posted by Black33

might be going cos a friend is taking his vl turbo - but I don't know if I'm gonna take my car down??

what are the people there like, never been!!

its good i went last friday but didnt run! i just wanna go to race my friends vr 5.0, thers sum real quick ie 9sec cars but it's just fun 2 see what your car can do!

update!

gerald just called me, the new dump pipe aint matching the location of my 3 inch front pipe, so its going to exhaust shop now to get the front pipe cut and rotated so it fits properly!

This means no dyno tune today, and since grand final is tmorow the dyno shop is closed, so i gotta wait till monday to get the s-afc tuned!!! FARKKKKKKKKKKKKKKKKKKKK:mad:

Originally posted by ex-static

damn.. so will you be comming to the meet tonight?

depends if i get my car back tnite! might be tmorow morning!

he had to drive it to exhaust shop with no exhaust, straight off the dump pipe, that would have sounded sweet!!:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...