Jump to content
SAU Community

Recommended Posts

Its on the dump pipe! (cant miss it, its easy to get to on these cars) Just unplug it, get a good spanner onto it or a o2 socket if you have one & carefully undo it. Then reverse for install of new o2 sensor! :thumbsup:

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

hey fellas,dunno if this will help. i had a 32 gtst, was hungry as F. was doing like half a tank to about 120k's with a bit of boosting here and ghere, wacked some new spark plugs in it..done the same drive and it only used a quarter of a tank, massive difference. hope that helps

hey fellas,dunno if this will help. i had a 32 gtst, was hungry as F. was doing like half a tank to about 120k's with a bit of boosting here and ghere, wacked some new spark plugs in it..done the same drive and it only used a quarter of a tank, massive difference. hope that helps

what plugs did you end up using? something I think I may look into...

thanks mate!! Do the S2 stags only have one oxy sensor?? (sorry if thats a dumb question)

Edited by tchard

BCPR6ES for a stock car is perfect they come either pre-gapped at 1.1mm or 0.8mm.

Depending on the state of your coil packs 1.1mm gap should be fine but if the coils are getting daggy then you might nee to gap them down to about 0.8mm.

There is only one 02 sensor.

Yeah, that sensor is the same but the plug is different

Only Nissan make the neo sensor but will charge you like $300

Just grab that one and some crimp connectors and you'll be laughing

what plugs did you end up using? something I think I may look into...

thanks mate!! Do the S2 stags only have one oxy sensor?? (sorry if thats a dumb question)

i use good old ngk copper plugs, ive head that iridiums and other brand last longer but copper plugs spark harder. i guess that helsp burn fuel better and so on. :)

copper plugs - best spark, shortest service life

platinum - shit spark, good service life

iridium - good spark (nearly/the same as copper), good service life

so yeah, iridium is the best of both worlds

i'm only running iridium plugs because they were in the car when i got it and i know how many kms they have done (got a decent service history with the car)

i use good old ngk copper plugs, ive head that iridiums and other brand last longer but copper plugs spark harder. i guess that helsp burn fuel better and so on. :)

reckon the ngk BCPR6ES-11 is the best option??

BCPR6ES-11 comes gapped at 1.1mm

BCPR6ES comes gapped at 0.8mm

maybe go the bigger gap, should help with fuel consumption a little (burns better but more likely to missfire if your coils are on their way out)

also, check the cat to make sure its not blocked or a ridiculousness tiny compliance cat, this could make it harder for the motor to breathe

reckon the ngk BCPR6ES-11 is the best option??

cant remember the plug number,just went to auto barn n asked for the right plug but i set them to 0.8mm on the 32.. they are that easy to change i just done it at service time and they were pretty cheap too......and always check ya coil packs, might have a hairline crack on the back. can cause arking out... could effect fuel consumption??

I do 400 to a tank with a little right foot here and there. Has gutted cat (made a massive differance!) stock center muffler and a blitz rice cooker muffler at the rear. Also upped the boost a little and has a k&n insert for maximum drift points.

Car has 101,000km on it now. You should replace the oxy sensor every 100,000km at least! I will be getting one soon

Car has 101,000km on it now. You should replace the oxy sensor every 100,000km at least! I will be getting one soon

Getting a new oxy sensor this month to help things out...

BCPR6ES-11 comes gapped at 1.1mm

BCPR6ES comes gapped at 0.8mm

maybe go the bigger gap, should help with fuel consumption a little (burns better but more likely to missfire if your coils are on their way out)

also, check the cat to make sure its not blocked or a ridiculousness tiny compliance cat, this could make it harder for the motor to breathe

Nfi what the coil packs are... (im a nub) and getting a hi flow cat to go with my 3" turbo back exhaust soon!

cant remember the plug number,just went to auto barn n asked for the right plug but i set them to 0.8mm on the 32.. they are that easy to change i just done it at service time and they were pretty cheap too......and always check ya coil packs, might have a hairline crack on the back. can cause arking out... could effect fuel consumption??

once again, nfi what these coil packs are... might hit up autobarn and get some new plugs this weekend

installed :) will start using it next time I fill up :D.... just got my O2 sensor yesterday.. will install it on the weekend... its too dark by the time i get home :(....

Edited by atomaly

What are you guys with a neo 25det ordering when it cones to the oxy sensor? And price and Availability ? I want one for sure but want to get the best for the neo

Then again can the stock ecu support a wide band?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...