Jump to content
SAU Community

Recommended Posts

hey im wrecking a r32 skyline

rb20det,manaul,black,114000k's

listed most parts but if not listed just ask.....

RB20DET Motor 114000'ks

r34 turbo with hks actuator

loom,ecu,afm,ignitor, ect

$1500

5speed conversion

gearbox,clutch,pedals,flywheel,

tailshaft,lines all the bits

$900

Mint dash with all vents in good condition $150

Culster Surround $75

Dash cluster 114'ks $100

Ignition Barrel and key $75

Mint steering wheel $150

streering coloum $50

stereo seround with gear boot $100

Centre console $50

Boot lid with gtr spolier $150

rear bar with reo $100

reverse lights $50 ea

type m rear pods $150

type m skirts $150

Bonnet been sanded back needs paint $100

Gtr headlights $150 pair (some damage to back of lights)

headlight Indercators $100 pair (home made mounting taps)

r32 16's stockies good tires $300

cat back exhaust $75 (home brand style)

Driverside contoll arm $100

Passenger side Controll arm $100

drivers guard $100

passenger side guard $100

kyb hill climb struts and stanard springs $150set of 4

Shell

NO REGO... so track only

rear will be complete

may be other parts front wont be rolling

$1250 msg for more detalis

Luke 0431 391 262

post-51589-0-90352400-1346476449_thumb.jpg

post-51589-0-00529000-1346476456_thumb.jpg

post-51589-0-35727000-1346476462_thumb.jpg

post-51589-0-03866300-1346476468_thumb.jpg

post-51589-0-17873800-1346476474_thumb.jpg

post-51589-0-48052600-1346476480_thumb.jpg

post-51589-0-80939100-1346476486_thumb.jpg

post-51589-0-65273900-1346476492_thumb.jpg

post-51589-0-07944200-1346476499_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/408291-sawrecking-r32-skyline/
Share on other sites

Mint dash with all vents in good condition $150

stereo seround with gear boot $100

Boot lid with gtr spolier $150

rear bar with reo $100

reverse lights $50 ea

type m rear pods $150

Bonnet been sanded back needs paint $100

all have been sold open to offers on parts will sell just the turbo,ecu ect ect

pm or ring with waht you need

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
    • Welcome Adam. Car looks great!
    • "With a 1.5-WAY, the LSD is effective only during acceleration."
    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
×
×
  • Create New...