Jump to content
SAU Community

Recommended Posts

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

Dave, Sure I could put a set of cams in, and make alot more power, but I just wanted to show that it's not necessary to make decent power and not run out of puff at 6500rpm. I'll do an 11sec pass with stock cams just for you;)

No need to show anyone the engine doesn't run out of puff at 6500rpm with standard cams, thats a silly thing to show people. Not like my rubber chicken, now thats worth people seeing.

I'll be pleased enough to see you run a 12 Paul :rofl: I know how long it has eluded you mate. Oh well at least you car has done a time 0.3 seconds quicker than my old stocker, I never thought I'd see the day :D Wait a minute I'll call the guy who has my car now and get him down the drags for a 12' before the season ends so I have another 6-7 months to hang it on you before you get a chance to go again :(

On that note i'd almost hazard a guess you are Ben Ellis as i was thinking about his R34 GT-T, yet you say "your" suspension setup.. curious

Not that "curious" really, I do consulting enginering from time to time and one of my jobs was to engineer aftermarket suspension for R34 GTT's to suite Australian conditions. The black one was was the first in Sydney that we could get a hold of for any decent period of time , so I did the intial work on it. Then I did futher set up work when they were stuck and couldn't get it to run consistent times. Hence "my suspension set up".

I keep saying in numerous posts that there is far more than max engine power involved in running a good time (1/4 or lap). This is just another example.

i was refering to Nittos wheni mentioned slicks as they are a semi slick tyre as oposed to a standard street tyre ala pauls

The nittos are still radials tho', can drive them around corners and things.

Otherwise I could hang it on Paul for using tyres wider than 205's and in a brand more expensive than simex to do his 13.0..... wait a minute I usually do :D

It's all relative. If its a street tyre then let it through to the keeper.

My GTR runs 12.0@119mph and paul pulls away on the road.

I dont believe this to be a statement which can reflect its potential. When i had my Skyline (During the period which it went 120mph) i raced another car on the street (which had gone 125mph at the track) i pulled car lenghts on it easy.

100% street driven, full trim, tru street tyres, street exhaust. street tune truly as driven and road legal.Pump BP fuel no additives no extra boost than used dailey driven around 1000kms a week inc every cruz.And still win every Dyno comp in WA inc Cabin,504kw by the way.Ask John munro bout this car and see it on the front cover of Zoom very soon.

Please Steve don't take my questions the wrong way in no way am I having a go at you or the car, Its just that I've noticed you post true street car a few times and wondered what you mean

So the likes of myself (11.7 on nittos) and gotboost (11.5 on full slicks) aren't true street cars because we change our tyres?

Or even Leewah I guess as he'd use different fuel and tyres (i am only guessing this though)

nah not the 11.5 the best he's done on the nittos is 11.67, the bastard pm's me everytime he beats my time hahaha

But what I asked was going off what Steve said we're not true street cars whether its nittos or slicks because we change things for the drags

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...