Jump to content
SAU Community

Recommended Posts

OK haha... Not much to say really she's pretty much bog stock, 1998 series 1 R34 Gtt Sedan in dark blue pearl, tiptronic auto, 85,000kms...

Mod list includes:

Body kit (front bar, side skirts, rear bar skirts)

Turbosmart boost controller running about 10 pound and boost guage,

3" Apexi turbo back exhaust

JVC head unit with ipod connectivity, pioneer 6" speakers in the back and 6" Jaycar Kevlar Splits up front,

K&N Hi Flow panel filter,

17" 5spoke unknown brand brans alloys with Kuhmo tyres up front and cheapies on the back (comes with 2 new spares for the back or front),

Only bad pint of the car is the bonnet needs a small repair and the bar needs painting which i was quoted 600 for all that to repaired.

I think that's about it, always serviced every 5,000 kms with Nulon oils and quality oil filter... diff oil, brake fluid, auto trans fluid, abs and steering fluid all changed the day i received it from the broker. Chasing 10k ono with roadworthy and reg till April for 13k i'll sell it with brand spanking BC coilovers, manual conversion and Black 18" Alloys with brand new tyres.

PM for more info and phone number should you want to discuss the car

post-88715-0-04569000-1346999479_thumb.jpg

post-88715-0-29494900-1346999496_thumb.jpg

post-88715-0-67730200-1346999509_thumb.jpg

Hey guys.. Just after an honest opinion... Is my asking price OK for this car? Be as rude as you want lol

Price is about right Chris.

It's just a bit hard to sell an auto trans on this type of car and in this market.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...