Jump to content
SAU Community

Skid Pan Day At Deca

BF2XR6

By BF2XR6,
in Archived Events

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You consider or the greater SAU?

SAU-Vic already runs 4 DECA days per year, and there is no way it'd just be a skidpan only... Would be far too boring! I'd argue MOAR back tracks

Other clubs run skid-pan only stuff... So if you want that perhaps go look to them?

Link to comment
Share on other sites
emts Grand Master

emts

Posted
Posted

Actually he was one fo the guys there on the weekend.

Think has asking if we would do one with no long/mini wang.

My thoughts on this.

you would end up with lots more sitting around and less driving time.

and the wang's break up the day with a bit of fun as well.

unless you did battles all day, and those courses are very limited then I think the layout that SAU run now is about as good as it could get.

Link to comment
Share on other sites
BF2XR6 Rookie

BF2XR6

Posted
  • Author
Posted (edited)

i am DEFINATELY not saying that the DECA day layout isn't outstanding as it is, and i was not suggesting drop the mini/long wang. I was just wondering if there would be any consideration for a skid pan only day as maybe a one off.... But the waiting time is a good point. i didnt think of that...

Edited by BF2XR6
Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • deev236
      Stagea S2 RS Four S Misfire/Rough Idle

      By deev236 · Posted

      And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • deev236
      Stagea S2 RS Four S Misfire/Rough Idle

      By deev236 · Posted

      Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • R3N3
      AC Compressor

      By R3N3 · Posted

      I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • pber13
      Stagea S2 RS Four S Misfire/Rough Idle

      By pber13 · Posted

      Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • Butters
      AC Compressor

      By Butters · Posted

      I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
×
×
  • Create New...