Jump to content
SAU Community

Recommended Posts

Hey Guys

Just did a service on my car and noticed a TCS SLIP light come on.

now from experience ive known this to occur with fault code 21 ( coilpacks )

however it aint the coilpacks as its returning fault code 17.

Ive tried resetting the fault log. still comes up.

I do notice however that the TCS is no longer working. there is no throttle cut-off mechanism working when i try to brek traction.

Any ideas?

Images would help too since im pretty new to all this.

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/409127-r34-gtt-fault-code-17/
Share on other sites

I think that code relates to the actual TCS throttle motor and/or the position sensor on it. I copied the below from an old SAU thread

Code 17

ABS-TCS control unit circuit

- Throttle control unit detects malfunction in the system (open throttle sensor harness etc.)

- TCS/ABS control unit detects malfunction

I have the same problem running on a PFC, as soon as I plug in the stock ECU the lights go away and everything works perfectly. When I first bought the PFC I plugged it in and it was all good, traction worked and the lights never came on.

All I have done on the engine was install turbo, new splitfires coil packs and put in .8mm plugs. I didn't toucht the TCS or throttle body at all and everything else I have done has been on other parts of the car as well.

I did a fault code check with the stock ECU and its all clear code 55, Im not sure but I think you can't do a fault code check on PFCs

It's really wierd and I still can't figure it out, Here the thread I posted about this issue with a PFC incase anyone has any input

http://www.skylinesaustralia.com/forums/topic/407575-tcsslip-light-on-with-pfc/

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll want to have the block drilled and tapped to suit 1/2in head studs and the head for the same. How much power do you intend to make?
    • Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
×
×
  • Create New...