Jump to content
SAU Community

Braking...

IMPORTD

By IMPORTD,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

PN-Mad Grand Master

PN-Mad

Posted
Posted

What? Why you need to know percentage just to get slotted rotors?

If changing calipers, sure, you might want to work it out, but what are you up to?

Go measure the size of the front and rear pistons, and work it out if its that important.

Link to comment
https://www.sau.com.au/forums/topic/409838-braking/#findComment-6544878
Share on other sites
IMPORTD Grand Master

IMPORTD

Posted
  • Author
Posted

What? Why you need to know percentage just to get slotted rotors?

If changing calipers, sure, you might want to work it out, but what are you up to?

Go measure the size of the front and rear pistons, and work it out if its that important.

No I don't need to know percentage to get slotted rotors... try reading it again before typing your annoyance... :rolleyes:

I already have slotted rotors on the front. Im wondering what a good upgrade to the rears would be... thanks for not answering that question too btw.

And in answer to your question, I'm up to nothing.

I'm wanting to know how much front brakes work compared to the rears and if an upgrade to the rears would be worth it... and if someone knows the percentage it would help me in my decision.

Link to comment
https://www.sau.com.au/forums/topic/409838-braking/#findComment-6546946
Share on other sites
The Max Mentor

The Max

Posted
Posted

Front/rear split is around 67/33.

Is it worth it? I still upgraded all four of my rotors to the DBA4000 series slotted variety and whacked in EBC Red Stuff pads all around too. May as well give them all the same treatment and the savings in not doing so isn't that significant.

Link to comment
https://www.sau.com.au/forums/topic/409838-braking/#findComment-6547171
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...