Jump to content
SAU Community

Rwd Modified R32 Gtr Gearbox Suit R32/r33 Gts-T/gtr -Qld

AHH31
 Share

Recommended Posts

AHH31 Enthusiast

AHH31

Posted
Posted (edited)

Hey guys,

I have a R32 GTR Gearbox which I have had modified to suit RWD application (Transfer case cut and shut, Transfer case internals stripped and modified to suit rwd)

Was going to run this setup in my r31 coupe but unfortunately it sits too low in my car but would be ideal for R32/R33 drivers

Transfer case was modified professionally and internals were reassembled by Top Cog here on the coast.

The best part about this gearbox is that if you ever have issues with the gearbox you can simply remove the transfer case and bolt it onto another gtr box, saving you $$$ on r33 gearboxes!

Chasing $550 ONO

Also have a R32 GTR Tailshaft for sale $150 (required for flange to suit gearbox)

and also a brand new gearbox mount which I purchased from nissan $80

and have a 5 puck sprung centred button (used) $100

Located in Coolum on Sunshine Coast QLD

PM ME for any info you need,

thanks

Edited by AHH31
AHH31 Enthusiast

AHH31

Posted
  • Author
Posted

Yeah mate, i dropped it into my car the other day bolted to a rb2530, I have the gtr tailshaft for sale also if it's for a 32 or 33 I'm unsure if the tailshaft will bolt straight in or require shortening, a gtr crossmember or similar would also be required

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...