Jump to content
SAU Community

Recommended Posts

Hey guys,

I have a 1998 Honda EJ8 Civic Coupe (manual) up for swap for any manual turbo sil or skyline. Car is currently on around 260k all highway k only from the previous owner (female), bought it around 250k. The engine is very healthy and strong, run smooth. The car have logbook, all the receipts and paper work. Car color is silver, 16" alloy wheel with 90% tread. The interior is immaculate!, exterior the paint is excellent! All electronic is working, a/c and heater all work perfectly. Timming belt had been replaced at around 215k. Car have been serviced regularly by previous owner and now me, I just serviced it at around 500km ago with Castrol Edge 5w-30. Car have 11 months of rego. Very well looked after, never been in any accident. Always use BP Ultimate. The only reason I let this baby go is I want a turbo car.

Good:

Ported & Polished head for more little bit more power and torgue, good for daily (good P&P job).

Injen CAI

Megan Racing header 4-2-1 (few week old) for low and mid range torgue, again good for daily driven.

Bad:

Sump gasket started to leak due to aged, just minor leak, nothing major (easy fix). Planned to fix it myself, but have no time.

Few small dents and 2 minor scratches from stupid people at the car park :( very hard to notice.

Anyone want a good looking daily driven car, this is the car for you, you will not be disappointed. If you are interested, please let me know via pm or text 0403201566.

Here is a few pics:

dscn1120r.jpgdscn1148ep.jpgdscn1160j.jpgdscn1111g.jpg

Edited by samyip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...