Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

I think so, but the back is still full of crap. It may take a while to get around to it.

Rear cradle still around?

Yep still here, and I have another cracked one waiting for a repair also.

There's no rush for it atm, think there is 2 to 4 of these things all on the under side of the wheel well.

2013-06-28093134_zpscc50a4e1.jpg

748A_001_zps9b52b834.png

The ones labelled 74300A. I hope this helps. If it's too much of a pain don't worry, I'll see if I can get it from Nissan.

  • 3 weeks later...

Ohhhhhhhh. Very interesting. What would a chap like yourself be looking for some equipmemt like that? I know its probably going to be useless to me but I just dont understand why they were taken out in the first place. Annoying.

It would depend want parts you need. Is the DVD rom above the glove box still? This is the brain that runs the monitor. I assume all the wiring is still there?

My car never came with the screen, I was planning to instal this one until I realised how much wiring was involved. Are you sure yours had a screen originally?

Im not 100% sure no. There is no dvd player in the upper space but there isnt a lining in there. I realy have to have a good look for wires ect but it seams like there was one there once upon a time. The surround where the pocket is has little slits on each side. So I dunno but is it realy that difficult if it didnt come with it? Its a shame because its got all the trip functions on it and stuff. Mmmmm

I have the entire loom anyway, but I imaging it may take a while to to remove it all. Perhaps make sure the loom is present and PM me to work out a price for the kit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...