Jump to content
SAU Community

Do You Have These In Your V36 Sedan Or Coupe? Help!

bosco

By bosco,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

projectx Collaborator

projectx

Posted
Posted

The one on the drivers side is for a panasonic tv tuner (probably dealer fitted). The tuner itself was located at the top of the boot in my car (but they could have put it anywhere) FYI its useless in Australia but good thing is you can remove it and use the wiring to install an aussie compatible one.

The thing on the passenger side i have not seen before. Im assuming its a antenna for mobile phone.

The little tiny little things in the corner are ultrasonic sensors for the alarm.

hope this helps

naz370 Contributor

naz370

Posted
Posted

I've got the panasonic system installed in my car too and i also have an alarm system with a similar looking antenna on passenger side too. I think its a good thing gives it more of a high-tech gizmo look.

bosco Enthusiast

bosco

Posted
  • Author
Posted (edited)

So I have received my paper work and spare keys for the V36. Did anyone receive one of these remote? will these remote be related to the big antenna on the a pillar?

post-66242-0-83993800-1350450916_thumb.jpg

Edited by bosco
naz370 Contributor

naz370

Posted
Posted

I received an extra remote control but its dead now as it needs charging and obviously i dont have a charger for it. however, the alarm works regardless. I read somewhere that it did have a gps tracking system installed. My remote is not like the one pictured

projectx Collaborator

projectx

Posted
Posted

interesting.. It does looks like a remote start thing.. It could be also to shut the car down if its stolen. Although if the thief isnt an idiot (but i guess they mostly are), then he could find the cable behind the antenna and cut it.. Seems overly complicated though, I would have thought most car thefts these days occur directly after they have stolen your keys first.. so if that thing is hanging off your keys, not much good..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...