Jump to content
SAU Community

Recommended Posts

Got my cobb today and am a bit bored at work. Don't have time to take the car to the workshop as it's the weekend but want to try to upgrade the TCM myself to see what the fuss is about in the meantime

I want to upgrade to LC5 and was wondering anyone know which map name and transmission type to select?

Map Name :

* Level 1 - 3300 RPM

* Level 2 - 3700 RPM

* Stock Style LC2 Logic

Transmission Type:

JF04B JF09D JF09E JW91A JW91B JW91D

Link to comment
https://www.sau.com.au/forums/topic/411384-cobb-tcm-question/
Share on other sites

When you go to install the TCM it will tell you which software version you have, then install KB15B (I think thats the code off the top of my head) LC4 VDC OFF V101...or at least thats what we like to use. Its nice :)

Once finished -

Set CC and TP values to zero then perform a Clutch Gear Relearn.

Set CC and TP to desired after that. Start with CC +1, +1, and TP 0, 0

Did the upgrade to LC4 with VDC OFF as recommended by Martin and it is a day and night difference to the LC2. Smoother shifts especially from 1st to 2nd and no more shuddering when taking off slowly or slowing to a near stop and then moving off again. Will play around with LC5 this week to see what the difference (if any is).

Did the upgrade to LC4 with VDC OFF as recommended by Martin and it is a day and night difference to the LC2. Smoother shifts especially from 1st to 2nd and no more shuddering when taking off slowly or slowing to a near stop and then moving off again. Will play around with LC5 this week to see what the difference (if any is).

Hmmmmm The bunny hopping and mild shudder I get in 1st when cold is starting to bug me - as well as reversing the bl00dy thing up a slightly inclined driveway to get out of the garage is doing my head in trying to find the right acc balance point so that I don't launch into the street, or bunny hop or get that clunking clutch slip noise....

What to do what to do... I wanna keep my warranty, but I hate this shit..

CC = Clutch Capacity for Odd and Even gears.

Adjustments range from -7 to +7 and linearly increase clutch apply pressure when shifting.

Normally from the factory these are set to 0 (right in the middle)

On a moderately powered up car setting these to +2 +2 is a good step

In a high powered car then +4 +4 is the go.

I dont go much over that as its hard on the seals and gears to run massive pressures.

Its a feel thing.

TP = Touch Point for Odd and Even gears

Touch Point is best explained as the prepositioning or pre-load on the clutches.

Adding more Odd TP will give more creep in 1st gear at idle speed

I normally leave these as close to 0 as to get the desired driving result

Hope that helps :)

haha how will lc4/5 improve the clutch take up point though?

i'm waiting on my code to upgrade the accessport - can be done through the ap manager now rather than having to send it back to US

i'm hoping the newer launch programs have better control on wheel slip, as 4000k lc will just dry my tyres even more than my current lc3

I was bored and flashed from LC4 to LC5. Maybe it's a psychological thing but I actually like LC4 better for day to day driving. It makes less sound and was a bit smoother during start/stop? I heard LC4 had more slip in the clutch, is this the reason?

I have since reflashed back to LC4 from LC5

When you go to install the TCM it will tell you which software version you have, then install KB15B (I think thats the code off the top of my head) LC4 VDC OFF V101...or at least thats what we like to use. Its nice :)

Once finished -

Set CC and TP values to zero then perform a Clutch Gear Relearn.

Set CC and TP to desired after that. Start with CC +1, +1, and TP 0, 0

Ok. Just followed these instructions precisely. Now I'll take it for a spin and see what the difference is. Still CC at +3 otherwise there is to much slip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...