Jump to content
SAU Community

Knocking With Stage 2 Cobb?

maxzugkraft

By maxzugkraft,
in R35 GTR

 Share

Recommended Posts

maxzugkraft Enthusiast

maxzugkraft

Posted
Posted

Hi Guys,

I got a Cobb and have been using Stage 2 & LC5 for my ADM2009 on the road since. Great burst of power and improved drivability.

(I'm on 98RON Shell vPower, HKS res midpipe, K&N air filter element)

I took it to Phillip Is (18 deg C) and Sandown yesterday (23 deg C).

I noticed flashing of the boost gauge - which I think means that there is "knocking". This usually happens after the 3rd or 4th lap, especially if I hit the rev limiter. Sometimes it occurs even at 5000rpm in 2nd gear and tends to linger for about 5 to 10 seconds. I feel the car is not as fast as it normally is.

How do I fix this?

Is this BAD for the engine?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/411598-knocking-with-stage-2-cobb/
Share on other sites
maxzugkraft Enthusiast

maxzugkraft

Posted
  • Author
Posted

Thing is, it doesn't do it when I drive on the road.

The Stage 2 is the Off-the-shelf map that came with the Cobb, which I thought was conservative.

What parameters should I log?

Thanks for the reply, Martin. I received your Trans Fluid 35TML last week and filled it up before Sandown. Goes nicely.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Sounds just like the tune is street conservative, but not track conservative (3-4 laps heat++ etc) - they are two totally different scenarios really.

Good news is it's not a major fix required, but certainly shouldn't keep trying to replicate it! Knock = bad.

So maybe after 2 laps have an easy 1 rather than going for 3-4 (until its fixed) :)

maxzugkraft Enthusiast

maxzugkraft

Posted
  • Author
Posted

Does that meant if I get a track-oriented tune, it would generate less power? Because it would have to dial down the timing or boost to cope with heat.

Would larger injectors to fix this?

Martin Donnon Mentor

Martin Donnon

Posted
Posted

No point in speculating about it, you need to generate a log of some third and fourth gear pulls and then let me have a look through it. Either that or get the right map for your car running Aussie 98 fuel - such as the tune we supplied for Duncan Forrests GTR that won the NSW Supersprint championship two years in a row. No knocking, plenty of power.

OTS Cobb maps are ok, but they tend to not be a bit sketchy when pushing the limits of our 98 fuel - as they simply dont calibrate on it in the US. Regardless of what you do, that flashing engine ligh it something to take note of, and try to avoid if the idea of rebuilding an engine scares you even just a little bit :)

Snowman Grand Master

Snowman

Posted
Posted

If you want someone local (Bayswater-Vic) the guys at Racepace can put it on the dyno for you and they have the Cobb tuning software.

9762 9421

But I've seen a few R35's knock at Sandown and PI as they have a lot of engine load at those tracks.

Martin Donnon Mentor

Martin Donnon

Posted
Posted

Ok maxzugkraft I have had a chance to have a look at a few of your looks. Looks like the tune is working really really nicely, the only time there was any indicated knock (false knock) was when you shifted on the rev limiter. The yellow line in the picture below is 'knock' and as you can see it stays on zero the whole length of the run...which is very nice :)

486666_10151212210434571_56066567_n.jpg

maxzugkraft Enthusiast

maxzugkraft

Posted
  • Author
Posted

Thanks Martin.

I can't see your picture. There is a question mark instead.

Will this tune work for warmer weather? 25-28deg C?

Bear in mind the log was done at 15 deg C ambient temp.

Is it running too rich, as I'm getting a lot more black soot on back now.

maxzugkraft Enthusiast

maxzugkraft

Posted
  • Author
Posted

Thanks Martin.

I can see your screenshot now.

Now I can use full power without holding back!

Can't wait to get back on the track!

Hope to see lap times plummet.

Good job. Cheers!

rehab2010 Proficient

rehab2010

Posted
Posted

If you want someone local (Bayswater-Vic) the guys at Racepace can put it on the dyno for you and they have the Cobb tuning software.

9762 9421

But I've seen a few R35's knock at Sandown and PI as they have a lot of engine load at those tracks.

Would you recommend some further intercooler upgrades on top of the custom dyno tune?

Pinging at 18degC or 23degC ambient temp is pretty bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...