Jump to content
SAU Community

Recommended Posts

Hey

Not long juss bought my R34 25GT and it came with the genuine triple cluster and gauges. When I opened the cluster it was not connected let alobe there was no wiring for it... Can anyone tell me where I can possibly purchase the wiring harness to connect the gauges up (except boost) without having to create it myself???

Thanks

:)

Just out of interest, what colour is the car, any pics?......secondly if it comes down to it, it's really easy to DIY the harness as you just take the switching illumination and power from the stereo harness just below and then it's a single wire to the ECU for the oil temp output.

The problem is the 25GT doesn't have the harness links that the loom would plug into, whereas the GT-t does....so it ends up being a DIY anyway.

Hey,

do all GTT's come with the triple gauge cluster?

cause i just bought mine and it doesn't. i really want to put it in tho.

so your saying the plug for the cluster should be under my dash? and i just need to cut the relevant hole and install the triple gauge harness?

Cheers,

Alex

The car is white and ill upload a few later and do you know where I can get a picture of what the terminals for the cluster represent at all? And anywhere place where I can get the plug for it with a few wires coming out of it from?

I hooked the volts and the illumination to the cigarette lighter and stereo.

Vacuum obviously won't be hooked up.

And I didn't have a Oil temp out on my 34 GT so that's not hooked up either (unless there is a way to do?)

Hey,

do all GTT's come with the triple gauge cluster?

cause i just bought mine and it doesn't. i really want to put it in tho.

so your saying the plug for the cluster should be under my dash? and i just need to cut the relevant hole and install the triple gauge harness?

Cheers,

Alex

Pretty sure they are from a GTR. There won't be any plugs behind the dash for it.

I hooked the volts and the illumination to the cigarette lighter and stereo.

Vacuum obviously won't be hooked up.

And I didn't have a Oil temp out on my 34 GT so that's not hooked up either (unless there is a way to do?)

That's right I used a GTt sensor mounted on the filter housing....a GTR one will fit.from memory......any of the models.

Hey guys i have a Skyline r34 gtv non turbo and i bought a triple guage i am not sure if that thing would fit in my car or do i need to change the whole dash board for that ?neither i have loom or i can find loom inside the wiring

need help

thanks

Pretty sure they are from a GTR. There won't be any plugs behind the dash for it.

really?

i am def keen on getting one so ill have to cut the dash or find a whole dash with one in it. anyone know anyone who can do the cutting? hahah I'm hopeless with these things

really?

i am def keen on getting one so ill have to cut the dash or find a whole dash with one in it. anyone know anyone who can do the cutting? hahah I'm hopeless with these things

Yeh pretty sure, not 100% on what wiring looms you will need to make it work though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...