Jump to content
SAU Community

Boot Latch Not Catching On R33

White_33

By White_33,
in General Maintenance

 Share

Recommended Posts

White_33 Enthusiast

White_33

Posted
Posted

Hopefully someone had a similar issue and can point me in the right direction. Last night I popped the boot to check something, went to close the boot and the latch wouldn't catch. Slammed down the boot a few times with more force, but nothing!!

Checked the latch on the actual boot, it was still open, flicked the inside with a screwdriver and it clicked shut so that's working. Checked the level on the car and that moved fine when I push it down. Checked the two bolts on the car which the latch holds onto but they were on tight. Loosened them anyway and tried to moved it higher up in case it couldn't reach the latch on the boot but it was already at the maximum height. Checked the alignment and that was fine too.

WTF has happened, boot was fine two days ago!!

Link to comment
https://www.sau.com.au/forums/topic/412293-boot-latch-not-catching-on-r33/
Share on other sites
jjman Mentor

jjman

Posted
Posted

could be anything. Just keep troubleshooting it as its not an overly complex mechanism and im sure you will find the problem n solve it.

Iv fixed 3 boot latches now. they are frustratng but ultimately fixable (99% of the time). Usually its some sort of alignment thats gone out or a pin or spring has come loose (15~ yr old cars)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy 路 Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr 路 Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek 路 Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Marek
      WGNC34 - floor mats

      By Marek 路 Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 路 Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
脳
脳
  • Create New...