Jump to content
SAU Community

Recommended Posts

Shiiiit. It bolts on right at the top of the gearbox. I wish I had of bolted that on before putting the motor / gearbox back in the car. :stupid:

I will have to find somewhere else to install it.

1 of the top gearbox bolts, can't remember what side but it'll be whatever side it reaches. It sits between the bolt head and the gearbox, like a washer.

EDIT: Beaten to it.

Edited by JonnoHR31

Should have a bracket attached to it and bolts into the top right hand side bell housing bolt

Wrong section too :)

Woops, didn't think of putting it in the driveline area :/

But thanks :)

Thanks for the info guys. Was looking at mine last night trying to figure this out. Also didn't realise it went at the top of the belhousing, which was done back up and now on the motor mounts. Doh! Cable ties to the rescue!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...