Jump to content
SAU Community

Recommended Posts

it's well known cars in US (even Japan) are always a good .3 -.5 sec quicker down the strip compared to what you can achieve on aussie soil - like for like

i think the main reason is the way they measure roll out, which on a hard launched awd car is a noticeable time advantage

Martin's 10.3 for eg would be close to a 10 flat on a US drag strip

a more accurate comparison when looking at acceleration times from different countries is the 60-130mph

Edited by domino_z

Its easy to make big power out of these stock engines. The trick is to keep the stock rods inside the engine over the vehicles life......

Getting a one-off drag number isnt so hard if you put your mind to it. It certainly impresses a lot that dont understand the risks, and the massive potential cost, involved

Why you would spend 10's of thousands of dollars on modifications for an extra 0.1 to 0.3 of a second over a 1/4 mile is beyond me. Especially with these kind of results with just a mid pipe and tune. A good video this one, some nice shots taken from inside and outside the car.

#! Edited by GT-R OZ

That's exactly right. People who spend that kind of money to get such a miniscule increase in performance (which they would hardly ever use anyway) don't do it because it actually makes any sense, they simply do it because they can! :yes:

Edited by GT-R OZ

Sorry off-topic.

Hey Domino, how did you install your rear diffuser fins? Did you have to drill the carbon panel under the car?

I like the look and should reduce soot on the back of the car. Did you find any difference?

Thanks.

i get absolutely zero soot daily driving on e85, that's the best solution to reducing carbon emissions..... or Martin should have the new injector end pulse tables for cobb which may help on 98 Ron

im not sure what part you're referring too

I am running the top racing carbon lower diffuser which replaces the oem part

IMG_4881.jpg

These are the hks kansai diffuser fins I bought a while ago. I haven't installed them yet, looks like you have to drill into the oem carbon diffuser. I had to paint the leading edge on both pieces matte black as they were quite rough looking with excess resin

but i can't see how either part could possibly reduce soot

nengun-3618-06-kansaiservice-carbon_rear_diffuser_and_fins.jpg

Edited by domino_z

Hey Dom -

Yup, that's the one - the Kansai diffuser fins. I thought you had installed that (saw your NAGTROC post).

Apart from the the good looks, the diffuser fins should extend the turbulent wake further behind the car at high speed, therefore reducing accumulation of exhaust output onto the rear face of the car. It should therefore reduce drag and improve rear downforce in conjunction with the rear upper spoiler.

^ Whoop-dee-do!

What would that cost the average consumer... just to put things into perspective.

Around $5K all up is what most GTR retailers will sell this kind of package for depending on existing mods already in place (ie. exhaust etc). and what brand parts they use. Not bad for a daily driven 10 second car :)

Many different kits from many different parts upgrade manufacturers to do this on these great cars. GTRs are a great base, which is why we all like them so much here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...