Jump to content
SAU Community

Recommended Posts

He Dudes!! For First...sorry for my Bad English :D

I will introduce my BNR32 GT-R. One of 25 in Complete Germany! In Germany the JDM-Scene is very small and it is very costly to import a JDM Exotic Car...Price to Buy in Japan + 10% Customs Duty + 19% VAT.....very Expansive :D

I have search for 2 Years for a perfect BNR32.....not cheaper than a BCNR33 but in very good condition!

Purchased on 25.01.2011 and a day in front of the tsunami loaded on a ship....Puhhhh!^^

I am a German "KFZ Meister" and I made at first my GT-R Fit!

In Germany we have the problem...nobody know about this Car...Parts are rare and expansive and we wait 2 month for this "hot shit"^^ nobody knows about the technical and the engine....well my first act was....maintenance for this car...

made all Clean and the wear parts new....all^^

new N1 waterpump,new N1 oilpump, HKS Timingbelt, Competition Clutch Stage 2, and and and.

The vehicle body Removed from "rust" and make new paint and seal up the underbody...

Here some Pictures...

gtruh.jpg

gtr1w.jpg

Here the first contact in Germany^^

25.png

08.png

04.png

And her after the "Bodyrepaircare"^^

64143426.jpg

50335147.jpg

53947134.jpg

80464555.jpg

41646821.jpg

94978850.jpg

88742448.jpg

84674473.jpg

bnr325.png

bnr321.jpg

bnr321.png

bnr322.png

bnr323.png

bnr324.png

bnr328.png

Link to comment
https://www.sau.com.au/forums/topic/412986-german-bnr32-gt-r/
Share on other sites

My third step was "modified" my interior and small other thinks like Nismo Carbon Front Vents....and One of 3!!!! Bride Brix II in Germany^^

engine2r.jpg

011bho.jpg

015yu.jpg

014af.jpg

013arw.jpg

65350624.jpg

0bp1070kl.jpg

0bp1350.jpg

0bp1398.jpg

66920465.jpg

56616605.jpg

92319143.jpg

26684091.jpg

97302919.jpg

0bp3692.jpg

0bp3796.jpg

0bp3800.jpg

0bp3953.jpg

0bp4055.jpg

0bp4113.jpg

0bp4122.jpg

0bp4145.jpg

At next time many things i will do but I am Happy I have placed the GT-R on the road in Germany....2 Years hard working! Made self new Lights for LHD...made sound, exhaust, engine,....certificate. The next step was more Power^^

Thanks for looking in this Thread ;)

Edited by Toho
  • Like 1

He Roy! Thanks for the post :D Yes in Germany a lot of People Drive in First Time with UK Plates but it is not 100% legally.....but a German License is possible...not easy but possible^^ I am from the near Dresden...East Germany^^ why? Do you from Australia? For Work in Germany?

My next GT-R Attack this Year is....make Engine Perfect and Cleaner, K-Sport Brakes and a Decat.....maybe small other thanks... let's see^^

Here the last Pictures^^

mg8363.jpg

with my CRX and Datsun Laurel

0bp7970kopie.jpg

0bp8001.jpg

Thank you *-*

It is great to hear this from a Country like Australia! In Germany every say "Boar its a Skyline!!!" but nobody see the work and the Details from this car....ok..a small Part (The JDM Family^^) see it. Its great for me to hear this here...Thanks!

All Pics I can get in a bigger size for Wallpaper. Write Me ;)

All photos were taken by me

Edited by Toho

Thank you ;) today i made the front new (install N1 Vents and reinstall N1 Front Lights....the Post 91 Lights only I install for the German License....Left Hand Drive Traffic conversion ;) ) and install a big brake kit 356mm on the front...pictures later...

Edited by Toho

OK come on! I am happy about a visitor from Australia! German Beer and "Bratwurst" wait for you :D I am near from Dresden in East Germany!

Thank you for the Words ;) And safe is safe :D A Datsun 720 Pickup, Datsun Laurel C230 , CRX ED9, Mercedes CLK 230 Kompressor and Skyline GTR deserve it^^

Yes...i think one of the Best Points in Germany ;) We have the "Sächsische Schweiz"....Cloud Atlas and other good Movies come from this place.....Dresden is a wonderful City and we have 3 Racetracks in the near.....but i think in the GTR we have on the "Autobahn" more Fun ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...