Jump to content
SAU Community

Recommended Posts

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2..

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

Link to comment
https://www.sau.com.au/forums/topic/413259-deca-officials-volunteers/
Share on other sites

I think there would only be a few stops left on the entry list or if not already full.

I know we have 1 motel booked solid and another filling fast.

So unless we get volunteer officials this will all be a waste of time..

So lets go people .

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2.. Michael

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

It still would be nice to see a few more people putting there hand up to help.

can never have enough incase some dont turn up..

Cheers Guys

Not sure if Bec has talked to you about me? As I've not heard anything from her.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...