R33 Wiper Motor Removal

[ZacZerbst]

Hey everyone of SAU.

im after some advice on the removal and refitting of a front wiper motor in a R33. obviously you undo the 4 bolts holding it in place but how do you go about where it attachs to the wiper arms, there doesnt appear to be any holes to get in behind it.

cheers

[t_revz]

Remove wiper blades. Remove rubber strip running across. Remove plastic cover. Disconnect motor and remove 4 bolts.

Take note of the direction the arm is facing from the motor. Remove bolt securing metal bar to motor and it should come out.

When its back together make sure to cycle the wipers before fitting the blades

[hawb]

That was straight forward but how do you remove the wiper mechanism arms inside the dash? I have the windscreen out and the wiper motor out already but cannot see how to disconnect the arms inside the dash from the central pivot point? Already undone the 3 fixings at the wiper blade pivot points at each end - the middle connector is the problem. Would appreciate some help here. Bruce.