Jump to content
SAU Community

R32 Project Up For Grabs

jaffadrifts
 Share

Recommended Posts

jaffadrifts Veteran

jaffadrifts

Posted
Posted (edited)

I've got an r32 coupe project car that I'm thinking of letting go if the right offer comes along.

its wine red.has a fuel setup in the boot.5 speed manual no crunches when shifting or anything.

has an rb20det with it that just needs to be installed. and also half an rb20, (block,crank,pistons,head)

all you need is a front bar and bonnet and put together then rego....

17 inch BBS on the front and 16 inch r32 rims on the rear.

will come with a mines ecu, stock coil packs, op6 turbo off an r34 gtt( was told it has been hi flowed but nfi ), stock rb20det turbo.some other parts sitting in the boot.

willing to swap for a daily with rego but only manual.

LOCATED IN QLD i will not deliver, u pick it up.

depending on how long it takes to sell i may have the front bar and bonnet situation sorted.

i just don't have the time or money to finish it as have returned to studying.

advertised elsewhere

make an offer.

no lowballing thanks.

will take $3500

mob 0468 719 321

Untitled.png

2011-12-15134118-1.jpgodo1.jpg

2011-12-15134222.jpg

Edited by jaffadrifts
Link to comment
https://www.sau.com.au/forums/topic/414593-r32-project-up-for-grabs/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...