Jump to content
SAU Community

Recommended Posts

Does anybody have a part number? Found them online for $150 each (!) but I only suspect that it's wheel bearing (could be diff') and if I replace one, I need to replace both... not keen to spend $300 chasing a noise...

Link to comment
https://www.sau.com.au/forums/topic/415231-series-2-c34-rear-wheel-bearing/
Share on other sites

Make sure it's not tyre noise - I had a friend who went and bought a set of bearings for her 40th Anniversary R33 GTSt after I bet her (should have put money on it too) that it was her tyres. My sister had the same tyres on her car (Maxxis MA-Z1's) and they are noisy as f*ck! Workshop swapped wheels and tyres with an R32 GTR that they were also working on at the time, and it was much more quiet.

Get hold of the suspect wheel and give it a solid shake, you will soon find out. Wheel bearings sound like a little steam train in the corner of your car, with little or no associated shudder. I first heard mine as a growl at really low speed (walking pace or less). Still drove it back from Apollo Bay to Melbourne then back to Adelaide before I worried about it, by then it had diagnosed itself.....

When you go to buy the part, Just Jap. Why buy two?

The manual RS4V has the extra tang with the bolt hole for the handbrake talk to the guys on the phone.

Call Joe Versace at Wheelworx for the fitment of your shiny new part. Be accommodating. Win.

Ah so is that what the extra bolt in the bearing assembly is for (saw that in the pic in the workshop manual)

thanks guys... from your descriptions it sounds like it is tyre noise. I only really noticed it after I had new tyres fitted (maxxis MA-V1's) and previously I had had the Z1's which were noisy. It it more of a high-med pitch whine/dull roar which starts at probably about 60km/h so I guess it sounds more like road noise (although could be diff - but doesn't change between accelerate/coast)

Only thing which confuses me a bit is that it gets gradually louder when braking, and continues down to fairly low speed (about 20km/h) when you pull up. Nothing very load, but noticeable, and from the back of the car.

Have a listen to the clip in a thread I started not long ago, and compare if it sounds the same.

http://www.skylinesaustralia.com/forums/topic/411000-tyrewheel-noise-audio-clip-included/

I too have maxxis MA-V1 tyres and the comment about low speed noise rings true. If you listen to the clip you'll notice a low frequency roar as I brake and come to a stop. My tyres are about 4-5 years old.

Thanks for the details Springsteen, feeling a little better about doing a short cruise up to Sydney soon :-) No play in the wheel bearings that I can tell.

That's great stuff John - I think mine sounds very similar; if anything yours is pretty quiet... but yeah same sort of dull roar when coming to a stop, I used to have bad road noise with the Max is MA-Z1s, seems with these Max is V1s it's similar.

Ah so is that what the extra bolt in the bearing assembly is for (saw that in the pic in the workshop manual)

thanks guys... from your descriptions it sounds like it is tyre noise. I only really noticed it after I had new tyres fitted (maxxis MA-V1's) and previously I had had the Z1's which were noisy. It it more of a high-med pitch whine/dull roar which starts at probably about 60km/h so I guess it sounds more like road noise (although could be diff - but doesn't change between accelerate/coast)

Only thing which confuses me a bit is that it gets gradually louder when braking, and continues down to fairly low speed (about 20km/h) when you pull up. Nothing very load, but noticeable, and from the back of the car.

Hahaha, what a coincidence - you just happen to have fitted the same/similar tyres!

Yeah I thought that was rather interesting. I do remember the Z1's being LOUD! So I have put the V1's down as being "moderately loud... a bit like a wheel bearing but at a slightly higher speed".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...