Jump to content
SAU Community

Recommended Posts

Hi guys,

Just had an intake manifold gasket replaced on my 33 GTR.

Now it it is running way too rich and needs retune.

I haven't had it long and suppose that it was last tuned compensating for the air leak.

Now it is running way too rich and after 10km or so the plugs become so fouled up it is almost undriveable.

It has a PFC of which I know little.

My question is does anyone know if there is a quick way of changing a setting or 2 on the hand controller,

or is a complete remap required.

Just so I can get it to the tuners reliably (and prior to that to the exhaust shop)

Otherwise its plugs out before each trip and then at the tuners.

Any help would be much appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/415530-pfc-question/
Share on other sites

Settings

Ign/inj

Turn fuel down a couple but not too far.

Drive it gently to the tuners

When ignition is turned off it will ignore those changes and go back to how it was

Thanks for the reply

But what exactly does "turn fuel down a couple" mean

My battery is flat at the moment so can't check hand controller,

and I know Ign/Inj settings section, but can't picture the screen

So how specifically would I make the adjustment

Keeping in mind it as a temp fix until proper tune

Link to comment
https://www.sau.com.au/forums/topic/415530-pfc-question/#findComment-6667806
Share on other sites

You can adjust fuel or ignition across the entire map. You will see how far you have adjusted it and the new figure it is currently running at.

Its pretty straight forward. Prob turn fuel down a couple (from 100 to 97-98) for example and see how it is.adjust more if necessary. Just be sure to take it easy driving there

Link to comment
https://www.sau.com.au/forums/topic/415530-pfc-question/#findComment-6667952
Share on other sites

You can adjust fuel or ignition across the entire map. You will see how far you have adjusted it and the new figure it is currently running at.

Its pretty straight forward. Prob turn fuel down a couple (from 100 to 97-98) for example and see how it is.adjust more if necessary. Just be sure to take it easy driving there

thanks man

will give it a go

Link to comment
https://www.sau.com.au/forums/topic/415530-pfc-question/#findComment-6671117
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...