Jump to content
SAU Community

Recommended Posts

Call has been made, advise has been given.

Hope all is well... :yes:

I don't think my battery will fit as it has skinny little poles.

If Richards has thicker poles then it might fit?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ there is NO JOKES in this !!! LOL

If you get it Jeremy, we can fit it!!!

Ok so checked the alternater belt its nice n tight. Gauge says the car is sitting on 12v when i turn the ignition but dont start it. and itjumps up and down randomly between about 11.8 to about 15 when i was driving it home without using indicator.or turning on my head lights. I might bring it by the shop tomorrow (if its starts) if thats ok Bren?

I'm gonna take a punt and say it's the Battery dropping a cell.

Sounds to me like the alernator is trying to charge it but when you put the indicators on, the volts dip cause there's little support from the Battery...

But I'm an eternal Noob at these things. :/

Fitting some new tyres on the front of Oldm8 Helga so I can drive to Sydney and slap 12months on her. Gives me some time to save some cash-o to fix the Chassis !

Helga 2.0 coming to a suburb near you soon !

No worries ill come over in my lunch break. Thank you!!!

See you then

Smoooooooooooooooooooooth :P

Fitting some new tyres on the front of Oldm8 Helga so I can drive to Sydney and slap 12months on her. Gives me some time to save some cash-o to fix the Chassis !

Helga 2.0 coming to a suburb near you soon !

Why do you need to go to Sydney to put rego on her? o.O

Smoooooooooooooooooooooth :P

Why do you need to go to Sydney to put rego on her? o.O

Becuase Helga is rego'd in NSW :( and given my chassis damage trying to get it into ACT is going to be a pain. My cuz knows a guy who doesn't even hoist the cars up when he inspects the cars, so I might be in luck given everythign else on the car is sweet !

Only problem is, I cannot insure it, Just Car knocked me back becuase of the chassis damage :( !

Becuase Helga is rego'd in NSW :( and given my chassis damage trying to get it into ACT is going to be a pain. My cuz knows a guy who doesn't even hoist the cars up when he inspects the cars, so I might be in luck given everythign else on the car is sweet !

Only problem is, I cannot insure it, Just Car knocked me back becuase of the chassis damage :( !

QBN and lots of places in ACT can do NSW rego inspections man, see if you can find someone local to look it over!

is that cos you told them of the existing damage?

This. lol you shouldn't have told them. Should insure the car comprehensively, then slide it up a gutter. Car is written off, chassis damage is a result of the accident, win win.

I tried to get some of the ACT shops to do a rego but they wouldn't touch it until it went over Dickson :P My cousin knows of a guy in Sydney who is very laxed about passing cars. The loudness and lowness doesn't even phase this bloke. Quick dolla aye?

Lying was an option, but I decided not too. Oh well, these things seem to work themselves out if you put in the time and effort. I guess you get an ease of mind if you ever buy anything off me, I wouldn't lie :P

I tried to get some of the ACT shops to do a rego but they wouldn't touch it until it went over Dickson :P My cousin knows of a guy in Sydney who is very laxed about passing cars. The loudness and lowness doesn't even phase this bloke. Quick dolla aye?

Lying was an option, but I decided not too. Oh well, these things seem to work themselves out if you put in the time and effort. I guess you get an ease of mind if you ever buy anything off me, I wouldn't lie :P

It isn't lying, it's just omitting certain facts lol.

You only need to take it over Dickson if you're going for ACT rego - not NSW. The places you took it were either deadset retarded, or didn't realise you were after NSW pink/blue slip stuff.

The deal with Dickson is people are too shit scared to do a inspection on these type of cars and tell them to go to Dickson.. But you only need to go to Dickson is if it less that 10yrs old. I got my cars changed from nsw to act through a normal inspection place.

But yes leaving out some info is better than screwing yourself to the wall by telling the truth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...